Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp568.000
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit Best
Rp568.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Hardware Juli 2023
SKU A10010
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
Lets check out these specs again
- 4 H-Bridges TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
- Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20
- Install the easy-to-use Python library, check out the examples and you're ready to go!
Jangan lupa tanyakan stok terlebih dahulu sebelum order ya
Kami pastikan barang yang kami kirim sesuai foto dan deskripsi iklan.
Untuk Info Lebih Lanjut bisa tanyakan lewat fitur Chat tokopedia,
Transaksi yang masuk hari Minggu dan Hari Libur Nasional akan kami proses keesokan harinya,
Selamat berbelanja di toko kami.
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.
Lets check out these specs again
- 4 H-Bridges TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
- Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20
- Install the easy-to-use Python library, check out the examples and you're ready to go!
Jangan lupa tanyakan stok terlebih dahulu sebelum order ya
Kami pastikan barang yang kami kirim sesuai foto dan deskripsi iklan.
Untuk Info Lebih Lanjut bisa tanyakan lewat fitur Chat tokopedia,
Transaksi yang masuk hari Minggu dan Hari Libur Nasional akan kami proses keesokan harinya,
Selamat berbelanja di toko kami.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan