Atur jumlah dan catatan
Stok Total: 125
Subtotal
Rp477.000
DC 6-80V BLDC Three Phase DC Brushless Motor Controller PWM High Power 1600W 20A Hall Motor Control Driver Board Motor Regulator
Rp477.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
DC 6-80V BLDC Three Phase DC Brushless Motor Controller PWM High Power 1600W 20A Hall Motor Control Driver Board Motor Regulator
This product is a drive module developed for inductive BLDC motor. The drive master chip is SNR8503M, and the special circuit for inductive motor drive is integrated inside the chip, supporting the Hall electric Angle of 120 degrees or 60 degrees, and the default is 120 degrees. It has simple peripheral circuit, complete functions, small size, simple debugging, high driving efficiency, and flexible application. Wide application and other characteristics.
SNR8503M is a 32-bit core MCU, which is very convenient for development and simulation debugging. In order to facilitate users to quickly drive the inductive BLDC motor, our company has completed the core algorithm of the software, and users only need to carry out secondary development on the basis of this software to quickly complete product development.
Features:
The module is bare by default. If the motor is driven below 5A current, it does not need to be forced to dissipate heat, but only needs to ensure normal ventilation. If the drive current exceeds 5A, it must be forced to dissipate heat.
Board 5pin Hall interface, used to access the motor Hall signal.
Onboard LED indicator for standby, working, error and other states.
Onboard potentiometer (0.5~5V),PWM speed control interface (frequency 1~20KHz), duty cycle 10~100%.
Onboard FG speed feedback interface, calculation speed RPM=FG frequency Hz*60/pole number.
Onboard CW/CCW steering interface, suspended for clockwise CW, short-circuited GND for counterclockwise CCW steering.
Onboard UART serial port. Users can control the module through the serial port protocol.
Onboard burning interface for updating the burning program.
Specifications:
Operating voltage: 6-80V
Maximum current: rated 20A peak 50A
Maximum power: 1600W
Overcurrent protection: yes
Product size: 78mmx57mmx20mm
Motor drive base
There is hall starting and commutating
This product is a drive module developed for inductive BLDC motor. The drive master chip is SNR8503M, and the special circuit for inductive motor drive is integrated inside the chip, supporting the Hall electric Angle of 120 degrees or 60 degrees, and the default is 120 degrees. It has simple peripheral circuit, complete functions, small size, simple debugging, high driving efficiency, and flexible application. Wide application and other characteristics.
SNR8503M is a 32-bit core MCU, which is very convenient for development and simulation debugging. In order to facilitate users to quickly drive the inductive BLDC motor, our company has completed the core algorithm of the software, and users only need to carry out secondary development on the basis of this software to quickly complete product development.
Features:
The module is bare by default. If the motor is driven below 5A current, it does not need to be forced to dissipate heat, but only needs to ensure normal ventilation. If the drive current exceeds 5A, it must be forced to dissipate heat.
Board 5pin Hall interface, used to access the motor Hall signal.
Onboard LED indicator for standby, working, error and other states.
Onboard potentiometer (0.5~5V),PWM speed control interface (frequency 1~20KHz), duty cycle 10~100%.
Onboard FG speed feedback interface, calculation speed RPM=FG frequency Hz*60/pole number.
Onboard CW/CCW steering interface, suspended for clockwise CW, short-circuited GND for counterclockwise CCW steering.
Onboard UART serial port. Users can control the module through the serial port protocol.
Onboard burning interface for updating the burning program.
Specifications:
Operating voltage: 6-80V
Maximum current: rated 20A peak 50A
Maximum power: 1600W
Overcurrent protection: yes
Product size: 78mmx57mmx20mm
Motor drive base
There is hall starting and commutating
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan