5.0/ 5.0
100% pembeli merasa puas
7 rating • 4 ulasan
5(7)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 7
Subtotal
Rp1.699.000
Jumper T pro / Tpro JP4in1 multiprotocol hall sensor gimbal remote
Rp1.699.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Drone RC
Jumper T pro TPro JP4in1 Multiprotocol hall sensor remote gimbal
Features: JP4-in-1 internal Multi-protocol module included. DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan etc. OpenTX firmware Hall sensor gimbals ELRS Nano / TBS CRSF Nano compatible module bay on rear side. USB-C internal charging Up to 16 channels of output (depending on the receiver) Wide voltage input (2pcs 18650 recommended) Vibration reminder function Support telemetry (depending on the receiver) LUA Script support: Yes
Specification: Radio:Size:160*128*6 voltage:DC6V-DC8.4V
Firmware: OpenTX Display: 1.3 inch LCD display, 128* 64 resolution Gimbal Type: HALL Sensor Upgrade method: USB online upgrade Simulator mode: 3.5mm standard ppm External Micro SD Card: reserved SD card slot Module: Product: Jumper 2.4G ELRS TX Module Model Name: AION TX NANO Screen: OLED MCU: ESP32 RF Output Power: 10-500mw Frequency Range: 2.4GHz-2.5GHz Firmware: ExpressLRS Antenna: Directionality Diamond antenna for best signal penetration Working Voltage： DC5-8.4v Maximum receive refresh rate: 500Hz Menu button: 5 directions button Voltage: DC6-8.4V Current: ＜400mA Port: S.port Firmware update: via Wifi, UBC-C, or Blue tooth
Package Included:
1*T-Pro JP 4in 1 internal module Remote Controller 1*Zipper Case
1*Manual Book
1*Stick Holder
1* Adaptor External Module
Features: JP4-in-1 internal Multi-protocol module included. DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan etc. OpenTX firmware Hall sensor gimbals ELRS Nano / TBS CRSF Nano compatible module bay on rear side. USB-C internal charging Up to 16 channels of output (depending on the receiver) Wide voltage input (2pcs 18650 recommended) Vibration reminder function Support telemetry (depending on the receiver) LUA Script support: Yes
Specification: Radio:Size:160*128*6 voltage:DC6V-DC8.4V
Firmware: OpenTX Display: 1.3 inch LCD display, 128* 64 resolution Gimbal Type: HALL Sensor Upgrade method: USB online upgrade Simulator mode: 3.5mm standard ppm External Micro SD Card: reserved SD card slot Module: Product: Jumper 2.4G ELRS TX Module Model Name: AION TX NANO Screen: OLED MCU: ESP32 RF Output Power: 10-500mw Frequency Range: 2.4GHz-2.5GHz Firmware: ExpressLRS Antenna: Directionality Diamond antenna for best signal penetration Working Voltage： DC5-8.4v Maximum receive refresh rate: 500Hz Menu button: 5 directions button Voltage: DC6-8.4V Current: ＜400mA Port: S.port Firmware update: via Wifi, UBC-C, or Blue tooth
Package Included:
1*T-Pro JP 4in 1 internal module Remote Controller 1*Zipper Case
1*Manual Book
1*Stick Holder
1* Adaptor External Module
Ada masalah dengan produk ini?