CNC Shield V3 3D Printer GRBL Open-Source Board | Arduino Uno Support

Spesifikasi : 1. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) 2. Uses removable A4988 compatible stepper drivers. (A4988, DRV8825, TMC2130 and others) 3. PWM Spindle and direction pins 4. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins A4 and A3) 5. 2 x End stops for each axis (6 in total) + one Probe 6. Coolant enable output 7. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) 8. Compact design. 9. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. 10. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) 11. Dimensions: 68 x 54 x 11.6mm Di Aplikasikan Pada : 1. CNC Laser engraver machine 2. PCB engraving machine 3. CNC router / milling machine 4. Robot Controls *Sebelum dikirim, barang akan di cek terlebih dahulu mulai dari fisik, fungsi dll. Isi paket: 1x CNC Shield V3 - 3D Printer GRBL Open-Source Board | Arduino Support Silakan di order gan