DS-3E1309P-EI/M Hikvision 8 Port Fast Ethernet Smart POE Switch

General
Shell Metal material, fan-free design
Net Weight 0.4 kg (0.9 lb)
Gross Weight 0.9 kg (2.0 lb)
Dimensions (W × H × D) 170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity 5% to 95% (no condensation)
Relative Humidity 5% to 95% (no condensation)
Power Supply 48 V DC, 1.35 A
Installation Mode Desk-Mounted,Wall-Mounted
Max. Power Consumption 65 W
Power Consumption in Idle 5 W
Surge Protection 6 kV
Network Parameters
Ports 8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
MAC Address Table 8 K
Switching Capacity 5.6 Gbps
Packet Forwarding Rate 4.17 Mpps
Internal Cache 4 Mbits
PoE Power Supply
PoE Standard IEEE 802.3af,IEEE 802.3at
PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port PoE: Ports 1 to 8
Max. Port Power 30 W
PoE Power Budget 60 W
Software Function
Long Range
Ports 1 to 8: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions
supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
System Maintenance
Support DHCP Client. Enabled by default for dynamic assignment of management IP
addresses.
Support remote management via Hik-Partner Pro.
Support 802.1ab LLDP for peer device discovery.
PoE Watchdog Ports 1 to 8: auto detect and restart the cameras that do not respond