5.0/ 5.0
100% pembeli merasa puas
1 rating • 0 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp393.000
Tool DIYMORE Intelligent Digital LCD Temperature Humidity Controll
Rp393.000
Tool DIYMORE Intelligent Digital LCD Temperature Humidity Controll
Stock Ready, PO 1 Hari (Quality Control), hanya untuk pengecekan barang dan pengemasan barang agar lebih aman sebelum dikirim. Selamat Berbelanja. :)
DIYMORE Intelligent Digital LCD Temperature Humidity Controller SHT20 Sensor AC110V-220V Appointment timing
Semua Produk Di Toko Kami PO (Personal Pre-Order) 10 Hari. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15 Hari.
Time calibration operation mode:
In the case of power on, long press the setting button to enter the setting interface, short press the setting button to quickly switch (P/F/H), set the time to H, select H1-H5 by the up and down keys, and select the corresponding if you need real-time clock setting H1 item, short press the power button to enter the setting time, the up button is to increase, the down button is to decrease, and the power button is to confirm
Instructions for setting operation:
1. In the case of power on, long press the setting button to enter the setting interface, short press in the setting interface to switch quickly (P/F/H), you can use the up and down keys to select P1-P5/F1-F4/H1-H5, and then Short press the power button to confirm and enter the setting parameters
Product parameters:
Product name: Intelligent temperature and humidity controller
Product model: W-1212
Power supply voltage: AC110-220V
Working frequency: 50HZ
Measuring range: -40~+120C 0~100%RH
Measurement accuracy: temperature 0.3C humidity 3%RH
Sensor cable length: 100CM
Size: 79.5*43*36mm
Shell material: surface shell ABS, bottom shell flame retardant ABS
Package Included:
1PCS * Intelligent temperature and humidity controller
Tips:
1. In normal mode, short press the setting key or plus and minus keys to view the setting parameters,
Return to normal mode after 1 second.
2. In the setting mode, if no button is pressed, it will automatically return after 10 seconds
Normal working mode.
Note:
The product is shipped without a battery. Need to buy the battery by himself. The battery model: CR1220 3V button. The battery needs to be calibrated for the first time.
ID-Spe
Stock Ready, PO 1 Hari (Quality Control), hanya untuk pengecekan barang dan pengemasan barang agar lebih aman sebelum dikirim. Selamat Berbelanja. :)
DIYMORE Intelligent Digital LCD Temperature Humidity Controller SHT20 Sensor AC110V-220V Appointment timing
Semua Produk Di Toko Kami PO (Personal Pre-Order) 10 Hari. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15 Hari.
Time calibration operation mode:
In the case of power on, long press the setting button to enter the setting interface, short press the setting button to quickly switch (P/F/H), set the time to H, select H1-H5 by the up and down keys, and select the corresponding if you need real-time clock setting H1 item, short press the power button to enter the setting time, the up button is to increase, the down button is to decrease, and the power button is to confirm
Instructions for setting operation:
1. In the case of power on, long press the setting button to enter the setting interface, short press in the setting interface to switch quickly (P/F/H), you can use the up and down keys to select P1-P5/F1-F4/H1-H5, and then Short press the power button to confirm and enter the setting parameters
Product parameters:
Product name: Intelligent temperature and humidity controller
Product model: W-1212
Power supply voltage: AC110-220V
Working frequency: 50HZ
Measuring range: -40~+120C 0~100%RH
Measurement accuracy: temperature 0.3C humidity 3%RH
Sensor cable length: 100CM
Size: 79.5*43*36mm
Shell material: surface shell ABS, bottom shell flame retardant ABS
Package Included:
1PCS * Intelligent temperature and humidity controller
Tips:
1. In normal mode, short press the setting key or plus and minus keys to view the setting parameters,
Return to normal mode after 1 second.
2. In the setting mode, if no button is pressed, it will automatically return after 10 seconds
Normal working mode.
Note:
The product is shipped without a battery. Need to buy the battery by himself. The battery model: CR1220 3V button. The battery needs to be calibrated for the first time.
ID-Spe
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan