Hioki 3285 Clamp On AC/DC HiTester

Hioki 3285 Clamp On AC/DC HiTester

Analysis for DC to distorted waves

200 Arms, clamp aperture: 55 mm(2.17") Diameter
Inrush current crest value
RMS value of full-wave rectified waveforms
Waveform and harmonic analysis

Specifications
AC Current range AC (RMS or Peak value)200.0 or 2000 A AC, 2 ranges (1.3 % rdg. 3 dgt. at 50 or 60Hz)
AC+DC (RMS or Peak value)200.0 or 2000 A AC, 2 ranges (1.3 % rdg. 13 dgt. at 50 or 60Hz), Effective value rectifier
DC Current range DC (Average or Peak value)200.0 or 2000 A DC, 2 ranges (1.3 % rdg. 3 dgt.)
AC Voltage range AC (RMS or Peak value)30.00 to 600 V AC, 3 ranges (1.0 % rdg. 3 dgt. at 50 or 60Hz)
AC+DC (RMS or Peak value)30.00 to 600 V AC, 3 ranges (1.0 % rdg. 7 dgt. at 50 or 60Hz), Effective value rectifier
DC Voltage range DC (Average or Peak value)30.00 to 600 VDC, 3 ranges (1.0 % rdg. 3 dgt.)
Other functions Frequency: 1 to 1000 Hz, Mode: Max./Min./AVE./RMS Record mode/Auto-off
Analog output DC, or AC 1 V /f.s. ,Level output: with REC mode, Waveform output: with MON mode
Frequency characteristics (at AC current / voltage) DC, 10 to 1 kHz
Display section Current / 2000 dgt. Voltage / 3000 dgt. Bar graph / 35 seg.
Sampling rate 2 or 4 times/sec (Slow: 1 time/3 sec)
Crest factor (RMS) 2.5 (1.7 at 600 V range), 1.42 (2000 A range)
Max. circuit voltage 600 V AC rms (insulated wire)
Power supply 6F22(006P) 1, Continuous use 25 hours, or AC adapter
Core jaw diameter 55 mm(2.17 in)
Dimensions (WxHxD), Weight 62 mm(2.44") x 260 mm(10.24") x 39 mm(1.54"), 540 g (19.0 oz)