spesifikasi sama saja mungkin baudrate saja yg berbeda dan penangkapan satelit jauh lebih cepat dibanding beitian all series..support ublox7 inav&Beta, support Galileo,support sbas mode ,(antena cirocom bukan beitian GPS)
Feature:
ParameterSpecificationElectrical CharacteristicsChipset-KTReceiving FormatGPS,GLONASS,Galileo,BeiDou,QZSS and SBASFrequencyGPS L1, GLONASS L1, BeiDou B1, SBAS L1, Galileo E1Channels72 Searching ChannelSensitivityTracking-167dBmReacquisition-160dBmCold start-148dBmHot start-156dBmAccuracyPosition Horizontal2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)Velocity0.1m/sec 95% (SA off)Timing1us synchronized to GPS timeAcquisition TimeCold Start26sWarm start25sHot start1sData and Update RateSupport Rate4800bps to 921600bps,Default 9600bpsData LevelTTL or RS-232,Default TTL levelData ProtocolNMEA-0183 or UBX, Default NMEA-0183Single GNSS1Hz-18HzConcurrent GNSS1Hz-10Hz,Default 1HzOperational LimitsAltitude50,000m MaxVelocity515m/s MaxAccelerationLess than 4gPower consumptionVCCDC Voltage 3.0V-5.5V,Typical: 5.0VCurrentCapture 70mA/5.0VMechanical SpecificationsDimension28mm*28mm*10mmWeight11.8gConnector1.25mm spacing between the 6pins patch seatEnvironmentOperating temp-40 °C ~ +85°CStorage Temp-40°C ~ +105°CLEDbuilt-in LEDTX LED:blue.The data output, TX LED flashingPPS LED:red.PPS LED not bright when GPS not fixed,flashing when fixed
Sangat cocok buat fixed wing, drone Freestyle,long range
Jika menggunakan inav atau betaflight tidak perlu konfigurasi lewat ublox center
It has a 1PPS pin that can output a pulse per second after fixed. The GPS module has a red LED on it and, after positioning, blinks with the output of the 1PPS pulse.
Package included:
1 x UART TTL Level GPS GLONASS Dual GNSS Module
LED:
1. TX LED: Blue. The data output, TX LED flashing 2. PPS LED: Red. PPS LED not bright when GPS not fixed, flashing when fixed.