Master Rem Radial Vertikal 19mm Black Silver NISSIN

・Piston diameter: Vertical Φ19 (3/4-Inch) [*Equivalent to horizontal 5/8-Inch] ・Compatible handlebar diameter: φ22.2 ・Lever adjustment (6-way adjustable) [Components] ・Brake switch (2-pole flat terminal type) ・Aluminum tank bracket ・Clamp holder (with mirror hole (M10 x P1.25 right handed screw)) ●Φ19 is compatible with horizontal type 5/8 inch, Φ17 is compatible with horizontal type 14mm.(*It cannot be used for other sizes.) ●For Φ22.2 handlebar. ●The lever adjustment can be 6-way adjustable. ●Brake switch (2 pole type with flat terminal), with aluminum tank bracket. ●The clamp holder comes with a mirror hole (M10 x P1.25 right handed screw). Caution *The following information is different from the previous model in the 2013 catalog due to specification changes. ・The reservoir tank can now be removed from the top. ・Clamp without mirror hole and mirror hole filling bolt are not included. ・The repair kit for the repair parts is different. *Banjo bolt (M10 x P1.25) sold separately. *Because the banjo bolts are located on the lower side, it may be necessary to replace the brake hose. *For Kawasaki models that use a switch box with the throttle wire coming out from underneath, it is necessary to change the switch box and replace the switch box with a thinner high throttle kit because the brake hose comes in contact with the switch box. *Be sure to confirm that sufficient mounting space is available by referring to the main unit dimensional drawing.CBR600RR (03-05), GSX-1300R HAYABUSA (99-08), BANDIT 1250S (07-), YZF-R1 etc. cannot be installed because the master touches a part of the body (cowl etc.) when turning the handlebar. *When removing the brake hose, use a hose that does not come into contact with the bottom of the brake lever.(This may cause deformation of the brake lever and result in a serious accident) *Do not use silicone-based DOT5 (BF5) brake fluid. Part number: 79882 SKU: 21554412