Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp871.000
Stang Tracker Special Φ7/8 Inci [Baja] HURRICANE HONDA CB1100
Rp871.000
- Kondisi: Baru
- Waktu Preorder: 27 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Handlebar Color: Chromium Plating
[Handlebar Specification]
Handlebar: Steel, Black/Outer Diameter Φ22.2mm/Inner Diameter Φ18mm
It is possible to use STD Cable and Hose.
[Handlebar Size]
Overall Height: 95mm
Overall Width: 785mm
Holder Mounting Part Effective Width: 135mm
Pullback Size: 160mm
Inner Angle: 24-degrees
Anteversion Angle: 50-degrees
JAPAN. Prototype, installation confirmation, mass production, consistently managed by our own company.Technology cultivated over many years at East Large Osaka, careful selection of Material by Know-how, several kinds of polishing, stamping of part number, high precision bending and welding, high Handlebar with a lot of commitment such as quality surface treatment, etc. Uses STKM 13 ASteel material with excellent tensile strength.JMCA safety standard value [Color] Clear. Thick coating, excellent durability and corrosion resistance TripleNickel ? Chromium Plating (Nickel 3 layer Chrome layer) Finish.
*Handlebar clamps (holders or posts) in the photograph are not included in the product.
*Size notation is for horizontal time.
*It requires an application for structural change if there is a change exceeding the height ± 40mm width ± 20mm from the vehicle body size described in the vehicle verification.
*The product on the photo may contain other coloring/types.
[HONDA::CB1100 -12 SC65 (Excluding uphill model ABS car)][HONDA::CB1300SUPER BOLDOR 10-12 * Required switch hole drilling | * Required side cap (For inner diameter φ 18mm) | * Changing the handling of the brake hose is required.][HONDA::CB400SS * Required switch hole drilling | * Required side cap (For inner diameter φ 18mm)][HONDA::FTR223
SKU : 2074670
[Handlebar Specification]
Handlebar: Steel, Black/Outer Diameter Φ22.2mm/Inner Diameter Φ18mm
It is possible to use STD Cable and Hose.
[Handlebar Size]
Overall Height: 95mm
Overall Width: 785mm
Holder Mounting Part Effective Width: 135mm
Pullback Size: 160mm
Inner Angle: 24-degrees
Anteversion Angle: 50-degrees
JAPAN. Prototype, installation confirmation, mass production, consistently managed by our own company.Technology cultivated over many years at East Large Osaka, careful selection of Material by Know-how, several kinds of polishing, stamping of part number, high precision bending and welding, high Handlebar with a lot of commitment such as quality surface treatment, etc. Uses STKM 13 ASteel material with excellent tensile strength.JMCA safety standard value [Color] Clear. Thick coating, excellent durability and corrosion resistance TripleNickel ? Chromium Plating (Nickel 3 layer Chrome layer) Finish.
*Handlebar clamps (holders or posts) in the photograph are not included in the product.
*Size notation is for horizontal time.
*It requires an application for structural change if there is a change exceeding the height ± 40mm width ± 20mm from the vehicle body size described in the vehicle verification.
*The product on the photo may contain other coloring/types.
[HONDA::CB1100 -12 SC65 (Excluding uphill model ABS car)][HONDA::CB1300SUPER BOLDOR 10-12 * Required switch hole drilling | * Required side cap (For inner diameter φ 18mm) | * Changing the handling of the brake hose is required.][HONDA::CB400SS * Required switch hole drilling | * Required side cap (For inner diameter φ 18mm)][HONDA::FTR223
SKU : 2074670
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan