Atur jumlah dan catatan
Stok Total: 99
Subtotal
Rp29.464.000
ACMER P1 Pro 20W Laser Engraver Cutter, Air Assist, Fixed Focus, 0.08*0.1mm Spot, 0.01mm Engraving Accuracy 32-bit Chips
Rp29.464.000
- Kondisi: Baru
- Waktu Preorder: 22 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
ACMER P1 Pro 20W Laser Engraver Cutter, Air Assist, Fixed Focus, 0.08*0.1mm Spot, 0.01mm Engraving Accuracy 32-bit Chips
1005007084471619
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Type : Other
Origin : Mainland China
Features:
22W Super power: one-time cutting 10mm plywood, can cut 30mm acrylic board many times, cutting 0.1mm stainless steel plate.ACMER P1 series is equipped with ESP32 dual processor chip. Built-in 256-bit color scale to achieve finer engraving effect and higher contrast effect.
Larger carving area and more carving materials: 400*390mm large carving area, can be carved on wood, bamboo, paper, acrylic, leather, PCB board, aluminum oxide, metal, ceramics, etc.; can cut wood, acrylic, bamboo, leather, paper, etc., can DIY hundreds of materials.
Automatic air-assist system: According to the content of the customer's document, the air-assist system can be turned on and off automatically, which can significantly improve the cutting speed and cutting accuracy while improving the quality of cutting and avoiding yellowing and burning of the material.
Optimize the cable alignment: X, Y axis alignment all use tank chain form, so that the harness is neat and tidy, no drop interference during operation; at the same time also avoid the wire outside the fall into the work area and lead to safety risks.
Multiple Protection: Design with anti-tilt protection function: the machine automatically stops working when tilted more than 15 ; And emergency stop switch for any sudden situations; And each P1 is equipped with a safety key, you need to insert the key to open the switch to work, to prevent small children or other people using your machine to cause accidental injury.
Wide compatibility: This machine
1005007084471619
? Pre-Order +/- Sampai Alamat 10-15 Hari
? FREE ONGKIR+PAJAK
?? Garansi uang kembali jika Rusak, Beda Produk
Type : Other
Origin : Mainland China
Features:
22W Super power: one-time cutting 10mm plywood, can cut 30mm acrylic board many times, cutting 0.1mm stainless steel plate.ACMER P1 series is equipped with ESP32 dual processor chip. Built-in 256-bit color scale to achieve finer engraving effect and higher contrast effect.
Larger carving area and more carving materials: 400*390mm large carving area, can be carved on wood, bamboo, paper, acrylic, leather, PCB board, aluminum oxide, metal, ceramics, etc.; can cut wood, acrylic, bamboo, leather, paper, etc., can DIY hundreds of materials.
Automatic air-assist system: According to the content of the customer's document, the air-assist system can be turned on and off automatically, which can significantly improve the cutting speed and cutting accuracy while improving the quality of cutting and avoiding yellowing and burning of the material.
Optimize the cable alignment: X, Y axis alignment all use tank chain form, so that the harness is neat and tidy, no drop interference during operation; at the same time also avoid the wire outside the fall into the work area and lead to safety risks.
Multiple Protection: Design with anti-tilt protection function: the machine automatically stops working when tilted more than 15 ; And emergency stop switch for any sudden situations; And each P1 is equipped with a safety key, you need to insert the key to open the switch to work, to prevent small children or other people using your machine to cause accidental injury.
Wide compatibility: This machine
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan