Atur jumlah dan catatan
Stok Total: 500
Subtotal
Rp4.615.000
WEIHONG NK105 G2 G3 three-axis four-axis DIY CNC motion control handle suitable for woodworking engraving machines, etc.
Rp4.615.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Is Smart Device : No
Application : Milling Machine
Model Number : NK105 G2/G3
Origin : Mainland China
Certification : CE,RoHS
Product List:
1control handle
Introduction
The NK105 all-in-one consists of a host system and an operation panel. The host system is also called a control box. The system control card, terminal board and other parts are used.
The components are integrated into one unit and connected to the operator panel via a 15-pin patch cord.
The upper and lower ends of the control box are inlaid with terminals, and the left side contains a USB interface and a DB15 interface. The DB15 interface is connected at the factory.
As a panel. The USB interface provides the user with an external USB device (such as a USB flash drive).
The operation panel, also known as the hand-held box, is similar in size to the handwheel, simple and light, and can be disconnected from the host system through a 15-pin patch cord.
The electric cabinet conveniently controls the operation of the machine. The moving distance is limited only by the length of the patch cord.
NK105 G2/G3 Specification parameters
Hardware specifications:
CPU: Arm Cortex-A8
Main frequency: 800MHz
Memory: 512MB
Flash memory: 512MB
Display: 12864 LCD module
I/O quantity: I16/O20
Performance :
The product has been tested for electromagnetic interference, group pulse, and surge, and reaches the fourth level protection standard of GB/T 17626.5-2008
Vibration resistance complies with GB/T 2423.10-2008 standard
After high and low temperature tests, reach the industry standard (GB/T 2423.102-2008)
Spindle function
Multi-speed: Provide 8-speed multi-spindle control
Tool management function
Tool magazine type: support in-line tool magazine
Tool setting method: support automatic and manual tool setting
Tool calibration type: fixed tool calibration, floating tool calibration, tool calibration first/tool calibration after tool change
Compensation function
Compensation method: Backlash compensation
Transfer files
Supported file formats: *.g; *.nc; *.ug; *.demo; *.iso; *.eng; *.cut; *.dxf; *.plt; *.txt
Operation function
Coordinate system setting: support G54-G59 coordinate system
Processing technology: array function, cycle processing
Convenient operation: continuous transfer of breakpoints, tool selection processing
High-speed and high-precision optimization
Multiple interpolation algorithms: T-shaped, S-shaped
Software language
Support Chinese, English, Polish, Vietnamese
Reliability and safety
CNC software alarm: program error, operation error, overtravel error, PLC error, IO communication error
G2 Installation size
G3 Installation size
Application : Milling Machine
Model Number : NK105 G2/G3
Origin : Mainland China
Certification : CE,RoHS
Product List:
1control handle
Introduction
The NK105 all-in-one consists of a host system and an operation panel. The host system is also called a control box. The system control card, terminal board and other parts are used.
The components are integrated into one unit and connected to the operator panel via a 15-pin patch cord.
The upper and lower ends of the control box are inlaid with terminals, and the left side contains a USB interface and a DB15 interface. The DB15 interface is connected at the factory.
As a panel. The USB interface provides the user with an external USB device (such as a USB flash drive).
The operation panel, also known as the hand-held box, is similar in size to the handwheel, simple and light, and can be disconnected from the host system through a 15-pin patch cord.
The electric cabinet conveniently controls the operation of the machine. The moving distance is limited only by the length of the patch cord.
NK105 G2/G3 Specification parameters
Hardware specifications:
CPU: Arm Cortex-A8
Main frequency: 800MHz
Memory: 512MB
Flash memory: 512MB
Display: 12864 LCD module
I/O quantity: I16/O20
Performance :
The product has been tested for electromagnetic interference, group pulse, and surge, and reaches the fourth level protection standard of GB/T 17626.5-2008
Vibration resistance complies with GB/T 2423.10-2008 standard
After high and low temperature tests, reach the industry standard (GB/T 2423.102-2008)
Spindle function
Multi-speed: Provide 8-speed multi-spindle control
Tool management function
Tool magazine type: support in-line tool magazine
Tool setting method: support automatic and manual tool setting
Tool calibration type: fixed tool calibration, floating tool calibration, tool calibration first/tool calibration after tool change
Compensation function
Compensation method: Backlash compensation
Transfer files
Supported file formats: *.g; *.nc; *.ug; *.demo; *.iso; *.eng; *.cut; *.dxf; *.plt; *.txt
Operation function
Coordinate system setting: support G54-G59 coordinate system
Processing technology: array function, cycle processing
Convenient operation: continuous transfer of breakpoints, tool selection processing
High-speed and high-precision optimization
Multiple interpolation algorithms: T-shaped, S-shaped
Software language
Support Chinese, English, Polish, Vietnamese
Reliability and safety
CNC software alarm: program error, operation error, overtravel error, PLC error, IO communication error
G2 Installation size
G3 Installation size
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan