Unik ARM mbed NXP LPC1768 Development Board Cortex-M3 MCU AT97 Murah

ARM mbed NXP LPC1768 Development Board Cortex-M3 MCU AT97 Overview The mbed NXP LPC1768 development board from ARM enables quick and easy creation of high-performance prototypes. Based on the powerful NXP LPC1768 Cortex-M3 processor, which runs at 96 MHz and offers 512 KB flash and 32 KB SRAM, the 32-bit mbed can handily outperform popular 8-bit prototyping platforms like theArduinoandBasic Stamp. The mbed NXP LPC1768 also offers peripherals not typically found on lower-performance prototyping boards, such as ethernet, USB OTG, a 12-bit ADC, a 10-bit DAC for a true analog voltage output, in addition to more common interfaces like serial (UART), SPI, I2C, and CAN. The mbed has a 40-pin DIP form factor with 0.1 #34;-pitch male header pins already soldered in, so it can be used with standardsolderless breadboardsand perfboards. (Note that while standard DIP ICs have a row spacing of 0.6 #34;, the mbed rows have a spacing of 0.9 #34;.) Feature: Can be powered by USB or an external 4.5 9 V supply (supply voltages up to 12V should generally be safe, but at these voltages the regulator may start to overheat if used to power external components) Compact module: 54 mm 26 mm Convenient form-factor: 40-pin DIP (0.9 #34; row spacing), 0.1 #34; pitch Drag-and-drop programming, with the board represented as a USB drive Best-in-class Cortex-M3 hardware 96 MHz ARM with 32 KB of SRAM, 512 KB of Flash Ethernet, USB OTG SPI, I2C, UART, CAN GPIO, PWM, ADC, DAC, DMA Easy-to-use, free on tools Web-based C/C++ programming environment Uses the ARM RealView compile engine API-driven development using libraries with intuitive interfaces Comprehensive help and on community On-board LEDs can be used for feedback, and a serial port over the USB connection allows for printf-style debugging. SKU : 3131/1083706460240265216/55