Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
Elcometer 106 Dollies Pack of 100 T1062895 20mm dolly Best
Rp6.200.000
Elcometer 106 Pull-Off Adhesion Tester 20 mm dolly
The Elcometer 106 Adhesion Tester is easy to operate and fully portable Type II adhesion gauge which provides a numerical value for adhesion strength.
Applications for the Elcometer 106 Adhesion Test include paint or plasma spray on bridge decking, coatings on steel, aluminium, concrete etc.
Supplied in a carry case - ideal for site testsHand operated - no need for a power supplyIncludes a cutter for EN13144 and ISO 4624 tests
Adhesion Test Method
A test dolly is bonded to the coating using an adhesive. The Elcometer 106 adhesion tester houses a spring arrangement which applies a lift force to the dolly as the tension is increased.
When the coating is pulled off the surface, an indicator on the scale shows the numerical value of adhesion strength expressed in terms of the force per unit area required to remove the dolly.
Inspection of the dolly face is required to determine the failure mode.
To increase sensitivity at low values or for uneven surfaces, a 40mm (1.52”) dolly is available. When using the 40mm (1.52”) dolly, divide the scale reading by 4.
Jangan lupa tanyakan stok terlebih dahulu sebelum order.
Kunjungi toko kami untuk melihat produk lainnya.
Layanan Pengiriman yang tersedia next day, reguler, dan cargo
Transaksi yang masuk hari Minggu dan Hari Libur Nasional akan kami proses keesokan harinya,
Terima kasih sudah berkunjung di toko kami.
The Elcometer 106 Adhesion Tester is easy to operate and fully portable Type II adhesion gauge which provides a numerical value for adhesion strength.
Applications for the Elcometer 106 Adhesion Test include paint or plasma spray on bridge decking, coatings on steel, aluminium, concrete etc.
Supplied in a carry case - ideal for site testsHand operated - no need for a power supplyIncludes a cutter for EN13144 and ISO 4624 tests
Adhesion Test Method
A test dolly is bonded to the coating using an adhesive. The Elcometer 106 adhesion tester houses a spring arrangement which applies a lift force to the dolly as the tension is increased.
When the coating is pulled off the surface, an indicator on the scale shows the numerical value of adhesion strength expressed in terms of the force per unit area required to remove the dolly.
Inspection of the dolly face is required to determine the failure mode.
To increase sensitivity at low values or for uneven surfaces, a 40mm (1.52”) dolly is available. When using the 40mm (1.52”) dolly, divide the scale reading by 4.
Jangan lupa tanyakan stok terlebih dahulu sebelum order.
Kunjungi toko kami untuk melihat produk lainnya.
Layanan Pengiriman yang tersedia next day, reguler, dan cargo
Transaksi yang masuk hari Minggu dan Hari Libur Nasional akan kami proses keesokan harinya,
Terima kasih sudah berkunjung di toko kami.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan