5.0/ 5.0
100% pembeli merasa puas
3 rating • 2 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
ETHERNET UART TTL Serial Ethernet Converter Module
Rp249.000
Waveshare
https://www.waveshare.com/wiki/2-CH_UART_TO_ETH
The 2-CH UART TO ETH provides an easy way to communicate between UART TTL and RJ45 Ethernet, allowing bi-directional transparent data transmission. It is easy to use, along with features like fast data rate, low power consumption, high stability, suits applications such as safety & security, IoT, and so on.
FEATURE:
Embedded Ethernet MAC and PHY layers
Bi-direction transparent data transmission between UART and Ethernet
10/100M, full-duplex/half-duplex auto-negotiation Ethernet interface, 802.3-compliant
Auto-MDI/MDIX, detect and switch cable type automatically
Supports DHCP auto-obtained IP and DNS domain access
Network parameter configuration like chip operating mode, port, IP, via host computer software or UART command
Four operating modes: TCP CLIENT, TCP SERVER, UDP CLIENT, UDP SERVER
2-CH UART concurrent operation, standalone transparent transmission for each channel
Full-duplex or half-duplex UART communication, supports RS485 RX/TX auto switch
Supports virtual serial port software (provided)
KEEPALIVE mechanism support
Comes with development resources and manual (examples for Pico/Raspberry Pi/Arduino/STM32)
https://www.waveshare.com/wiki/2-CH_UART_TO_ETH
The 2-CH UART TO ETH provides an easy way to communicate between UART TTL and RJ45 Ethernet, allowing bi-directional transparent data transmission. It is easy to use, along with features like fast data rate, low power consumption, high stability, suits applications such as safety & security, IoT, and so on.
FEATURE:
Embedded Ethernet MAC and PHY layers
Bi-direction transparent data transmission between UART and Ethernet
10/100M, full-duplex/half-duplex auto-negotiation Ethernet interface, 802.3-compliant
Auto-MDI/MDIX, detect and switch cable type automatically
Supports DHCP auto-obtained IP and DNS domain access
Network parameter configuration like chip operating mode, port, IP, via host computer software or UART command
Four operating modes: TCP CLIENT, TCP SERVER, UDP CLIENT, UDP SERVER
2-CH UART concurrent operation, standalone transparent transmission for each channel
Full-duplex or half-duplex UART communication, supports RS485 RX/TX auto switch
Supports virtual serial port software (provided)
KEEPALIVE mechanism support
Comes with development resources and manual (examples for Pico/Raspberry Pi/Arduino/STM32)
Ada masalah dengan produk ini?