Atur jumlah dan catatan
Stok Total: 104
Subtotal
Rp353.602
Commonly Used Operational Amplifier Tester Single Operational Amplifier Dual Operational Amplifier TL071 TL072 TL081/082
Rp353.602
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
1005008018545750
Selamat Datang Di Toko Kami
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : ALLOYSEED
Model Number : Single Dual Operational Amplifier
Origin : Mainland China
Type : Module
Condition : New
Hign-concerned Chemical : None
Commonly Used Operational Amplifier Tester DC 12V 100mA Single Operational Amplifier Dual Operational Amplifier TL071 TL072 TL081 TL082
Feature:
1. Premium Quality Materials
: Our commonly used operational amplifier testeris crafted using high-quality materials, ensuring durability and reliability. With a focus on quality, we guarantee a product that meets your expectations and provides long-lasting performance.
2. Circuit Board Interpretation:
Our single dual operational amplifierfeatures a circuit board that can interpret whether the IC can be used for amplification. This feature enables you to utilize the IC effectively and optimize its functionality for your specific needs.
3. Rough Conversion Rate Assessment:
Our op amp testerallows for a rough assessment of the chip's conversion rate. This feature provides valuable insights into the chip's performance and helps you make informed decisions based on its efficiency.
4. Unmask Low-Speed Chips Disguised as High-Speed:
With our single dual opamp tester, you can easily identify low-speed chips that attempt to deceive as high-speed chips. This feature helps you avoid counterfeit products and ensures you get genuine high-speed chips that deliver optimal performance.
5. Exquisite Design:
Our single op amp dual op ampboasts an exquisite exterior design that enhances its visual appeal. With attention to detail, we've created a product that not only performs well but also adds an aesthetic touch to your setup.
Specification:
Origin: Mainland China
Type: Module
Condition: New
Product size: 60.00x30.00x20.00mm
Product size: 2.36x1.18x0.79inch
Product description:
1. Connect the 12VDC power supply to the circuit board. At this time, the three red LED lights on the circuit board will light up.
2. Insert the op amp to be tested, paying attention to the direction of the notch.
The socket on the left is a test single op amp, with two red and yellow LED indicators on it.
The socket on the right is for testing dual op amps. The two sets of red and yellow LEDs above correspond to the two chips inside the dual op amps.
3. After inserting the chip:
If the op amp chip is normal, the yellow LED is on and the red LED is off.
If the output of the op amp chip is open circuit, the yellow LED turns off and the red LED turns on
If there is a short circuit inside the op amp chip, the red and yellow LEDs will flash alternately.
For low conversion rate chips, the LED indication status is always bright yellow and red will flash weakly. This can also be used to roughly judge the slew rate of the chip, because most of the polished chips sold on the market use low slew rates. Not only is it fast, it can also determine whether the chip is counterfeit.
The actual test conversion rate is lower, such as: OP07, LM741, yellow is always on, red is slightly brighter
Test high conversion rate chips such as: TL071, NE5534, MC34071 and other chips, yellow is always on, red is off
Single op amp models: LM741, LF356, NE5534, TL071, TL081, OP07 and other standard package single op amps
Dual op amp models: LM358, NE5532, TL072, TL082, MC1458, RC4558, OP275, AD827 and other standard package dual op amps
Power requirements: Voltage: 12VDC, current 100mA or more
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1xOperational Amplifier Tester
[relateproductdetail/]
Selamat Datang Di Toko Kami
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : ALLOYSEED
Model Number : Single Dual Operational Amplifier
Origin : Mainland China
Type : Module
Condition : New
Hign-concerned Chemical : None
Commonly Used Operational Amplifier Tester DC 12V 100mA Single Operational Amplifier Dual Operational Amplifier TL071 TL072 TL081 TL082
Feature:
1. Premium Quality Materials
: Our commonly used operational amplifier testeris crafted using high-quality materials, ensuring durability and reliability. With a focus on quality, we guarantee a product that meets your expectations and provides long-lasting performance.
2. Circuit Board Interpretation:
Our single dual operational amplifierfeatures a circuit board that can interpret whether the IC can be used for amplification. This feature enables you to utilize the IC effectively and optimize its functionality for your specific needs.
3. Rough Conversion Rate Assessment:
Our op amp testerallows for a rough assessment of the chip's conversion rate. This feature provides valuable insights into the chip's performance and helps you make informed decisions based on its efficiency.
4. Unmask Low-Speed Chips Disguised as High-Speed:
With our single dual opamp tester, you can easily identify low-speed chips that attempt to deceive as high-speed chips. This feature helps you avoid counterfeit products and ensures you get genuine high-speed chips that deliver optimal performance.
5. Exquisite Design:
Our single op amp dual op ampboasts an exquisite exterior design that enhances its visual appeal. With attention to detail, we've created a product that not only performs well but also adds an aesthetic touch to your setup.
Specification:
Origin: Mainland China
Type: Module
Condition: New
Product size: 60.00x30.00x20.00mm
Product size: 2.36x1.18x0.79inch
Product description:
1. Connect the 12VDC power supply to the circuit board. At this time, the three red LED lights on the circuit board will light up.
2. Insert the op amp to be tested, paying attention to the direction of the notch.
The socket on the left is a test single op amp, with two red and yellow LED indicators on it.
The socket on the right is for testing dual op amps. The two sets of red and yellow LEDs above correspond to the two chips inside the dual op amps.
3. After inserting the chip:
If the op amp chip is normal, the yellow LED is on and the red LED is off.
If the output of the op amp chip is open circuit, the yellow LED turns off and the red LED turns on
If there is a short circuit inside the op amp chip, the red and yellow LEDs will flash alternately.
For low conversion rate chips, the LED indication status is always bright yellow and red will flash weakly. This can also be used to roughly judge the slew rate of the chip, because most of the polished chips sold on the market use low slew rates. Not only is it fast, it can also determine whether the chip is counterfeit.
The actual test conversion rate is lower, such as: OP07, LM741, yellow is always on, red is slightly brighter
Test high conversion rate chips such as: TL071, NE5534, MC34071 and other chips, yellow is always on, red is off
Single op amp models: LM741, LF356, NE5534, TL071, TL081, OP07 and other standard package single op amps
Dual op amp models: LM358, NE5532, TL072, TL082, MC1458, RC4558, OP275, AD827 and other standard package dual op amps
Power requirements: Voltage: 12VDC, current 100mA or more
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1xOperational Amplifier Tester
[relateproductdetail/]
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan