bonus
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp750.000
Ray Flash Ring RAN160 for Nikon SB-800
Rp750.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Flash/Speedlight
ORIGINAL ...
Ray Flash Ring RAN160 for Nikon SB-800
( Converts SB-800 to a Ring Flash Unit - Used on D1/D700/D300/D300s/D200/D100/D90/D80/D70/D5000 Cameras )
The RAY FLASH Adapter is a very affordable way to achieve typical ringflash lighting quality normally only available to studio flash equipment users!
The unique RAY FLASH Adapter was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of acrylic light channels and reflectors to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered (they have a cable from ringflash to power pack).
The RAY FLASH Adapter creates a very special lighting effect: a "3-d shadow-wrapped look". Because all light originates from the front, i.e. from around the lens, it produces a virtually shadow-less look on the front of your subject, while a soft even shadow appears around the edges. It is ideally suited for fashion, portrait, beauty, wedding & macro photography as a main or fill-in light.
It works with almost all Nikon DSLRs, It simply slips over the front of the flash unit, and will fit any lens with a front diameter of no more than 4". And in addition, TTL operation works exactly the same as with the flash itself
The RAY FLASH Adapter does not change the colour temperature of the flash that powers it and the additional weight can easily be accommodated by the on-camera flash unit.
Ray Flash Ring RAN160 for Nikon SB-800
( Converts SB-800 to a Ring Flash Unit - Used on D1/D700/D300/D300s/D200/D100/D90/D80/D70/D5000 Cameras )
The RAY FLASH Adapter is a very affordable way to achieve typical ringflash lighting quality normally only available to studio flash equipment users!
The unique RAY FLASH Adapter was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of acrylic light channels and reflectors to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered (they have a cable from ringflash to power pack).
The RAY FLASH Adapter creates a very special lighting effect: a "3-d shadow-wrapped look". Because all light originates from the front, i.e. from around the lens, it produces a virtually shadow-less look on the front of your subject, while a soft even shadow appears around the edges. It is ideally suited for fashion, portrait, beauty, wedding & macro photography as a main or fill-in light.
It works with almost all Nikon DSLRs, It simply slips over the front of the flash unit, and will fit any lens with a front diameter of no more than 4". And in addition, TTL operation works exactly the same as with the flash itself
The RAY FLASH Adapter does not change the colour temperature of the flash that powers it and the additional weight can easily be accommodated by the on-camera flash unit.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan