4.8/ 5.0
100% pembeli merasa puas
5 rating • 1 ulasan
5(4)80%
4(1)20%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 63
Min. pembelian 2 pcs
Subtotal
Rp10.000
Vishay BC PR01 1W Metal Film Resistor 820R 820 Ohms 5%
Rp5.000
- Kondisi: Baru
- Min. Pemesanan: 2 Buah
- Etalase: Vishay BC PR01 PR02 PR03 Metal Film Resistors
Brand : Vishay BCcomponents
Value : 820 820 Ohms
Rating : 1W
Tolerance : 5%
Type : PR01
MFG P/N : PR01000108200JR500
Temperature coefficient : 250 ppm/K
Operating voltage : max 350V
Thermal resistance : 135 K/W (Cu-Leads)
Applied maximum film temperature : 250 °C
Dimension : 2.5 x 6.5 mm
COO : India
Original from Authorized Dealer
Features :
High power in small packages
Defined fusing characteristics
Meets active and passive flammability requirements as defined in IEC 60115-1
AEC-Q200 qualified (PR01 and PR02)
DESCRIPTION
A homogeneous film of metal alloy is deposited on a high-grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45.
Value : 820 820 Ohms
Rating : 1W
Tolerance : 5%
Type : PR01
MFG P/N : PR01000108200JR500
Temperature coefficient : 250 ppm/K
Operating voltage : max 350V
Thermal resistance : 135 K/W (Cu-Leads)
Applied maximum film temperature : 250 °C
Dimension : 2.5 x 6.5 mm
COO : India
Original from Authorized Dealer
Features :
High power in small packages
Defined fusing characteristics
Meets active and passive flammability requirements as defined in IEC 60115-1
AEC-Q200 qualified (PR01 and PR02)
DESCRIPTION
A homogeneous film of metal alloy is deposited on a high-grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45.
Ada masalah dengan produk ini?