Atur jumlah dan catatan
Stok Total: 96
Subtotal
Rp1.090.000
speedybee f405 wing app fixed wing fc flight controller high quality
Rp1.090.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Remote Control
Terima kasih telah berkunjung ke toko kami.
untuk pengiriman instant bisa tanyakan terlebih dahulu,jika langsung order dan ada kendala maka akan kami kirimkan menggunakan reguler. This controller is equipped with STM32 F405 MCU for faster and smoother performance, an ICM-42688-P IMU, 6 UARTS, and Bluetooth connectivity. With additional features like an OSD, barometer, and onboard RGB battery indicator, this controller is sure to provide an optimal flying experience.
Product Highlights
Wireless programming via SpeedyBee app
Supports various fixed-wing plane types, including VTOLs
Wide 7-36V input (2-6S LiPo)
11 PWM outputs for motor and servo control
6 UARTs for accessory connections
SpeedyBee F405 WING FC Board:
MCU: STM32F405, 168MHz, 1MB Flash
IMU (Gyro & Accelerometer): ICM-42688-P
Barometer: SPL006-001
OSD Chip: AT7456E
Blackbox: MicroSD Card Slot
6x UARTs
1x I2C (for magnetometer, digital airspeed sensor)
4x ADC (for VBAT, Current, RSSI, Analog AirSpeed Sensor)
12x PWM (11 PWM output + 1 LED pad)
ExpressLRS (ELRS) and Crossfire (CRSF) Receivers Supported (UART1)
Built-in inverter for SBUS input (UART2-RX pad)
3x LEDs (for FC STATUS – Blue, Green; 3.3V indicator – Red)
1x RGB
RSSI Supported (RS pad)
Supported FC Firmware: INAV (SpeedyBeeF405WING – default), ArduPilot (SpeedyBeeF405WING)
SpeedyBee F405 WING PDB Board:
Input voltage range: 7-36V (2-6S LiPo)
Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
Battery Current Sensor: 90A continuous, 215A peak; Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
TVS Protective diode: Yes
FC BEC output: 5.2V +/- 0.1V DC; Continuous current 2.4A, 3A Peak
VTX BEC output: 9V +/- 0.1V DC; Continuous current 1.8A, 2.3A Peak; Voltage adjustable (9V Default, 12V or 5V via jumper)
Servo BEC output: 4.9V +/- 0.1V DC; Continuous current 4.5A, 5.5A Peak; Voltage adjustable (4.9V Default, 6V or 7.2V via jumper)
SpeedyBee F405 WING Wireless Board:
Wireless Configuration: BLE mode (connect to Speedybee APP); Wi-Fi mode (connect to QGroundControl APP, Speedybee APP, MissionPlanner); Classic Bluetooth SPP mode (connect to QGround Membeli = Setuju
Tanyakan terlebih dahulu jika ada yang kurang jelas pada iklan produk
Barang yang telah dibeli tidak dapat ditukar/dikembalikan,kecuali kesalahan dari pihak kami dalam mengirimkan produk
Harap cek ulang pesanan sebelum melakukan pembayaran. Barang yang sudah dibeli tidak dapat dibatalkan karena kesalahan pihak pembeli.
Tolong untuk lampirkan VIDEO UNBOXING (saat proses pembukaan kemasan, bukan hanya saat barang sudah dibuka) apabila hendak mengajukan komplain.
untuk pengiriman instant bisa tanyakan terlebih dahulu,jika langsung order dan ada kendala maka akan kami kirimkan menggunakan reguler. This controller is equipped with STM32 F405 MCU for faster and smoother performance, an ICM-42688-P IMU, 6 UARTS, and Bluetooth connectivity. With additional features like an OSD, barometer, and onboard RGB battery indicator, this controller is sure to provide an optimal flying experience.
Product Highlights
Wireless programming via SpeedyBee app
Supports various fixed-wing plane types, including VTOLs
Wide 7-36V input (2-6S LiPo)
11 PWM outputs for motor and servo control
6 UARTs for accessory connections
SpeedyBee F405 WING FC Board:
MCU: STM32F405, 168MHz, 1MB Flash
IMU (Gyro & Accelerometer): ICM-42688-P
Barometer: SPL006-001
OSD Chip: AT7456E
Blackbox: MicroSD Card Slot
6x UARTs
1x I2C (for magnetometer, digital airspeed sensor)
4x ADC (for VBAT, Current, RSSI, Analog AirSpeed Sensor)
12x PWM (11 PWM output + 1 LED pad)
ExpressLRS (ELRS) and Crossfire (CRSF) Receivers Supported (UART1)
Built-in inverter for SBUS input (UART2-RX pad)
3x LEDs (for FC STATUS – Blue, Green; 3.3V indicator – Red)
1x RGB
RSSI Supported (RS pad)
Supported FC Firmware: INAV (SpeedyBeeF405WING – default), ArduPilot (SpeedyBeeF405WING)
SpeedyBee F405 WING PDB Board:
Input voltage range: 7-36V (2-6S LiPo)
Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
Battery Current Sensor: 90A continuous, 215A peak; Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
TVS Protective diode: Yes
FC BEC output: 5.2V +/- 0.1V DC; Continuous current 2.4A, 3A Peak
VTX BEC output: 9V +/- 0.1V DC; Continuous current 1.8A, 2.3A Peak; Voltage adjustable (9V Default, 12V or 5V via jumper)
Servo BEC output: 4.9V +/- 0.1V DC; Continuous current 4.5A, 5.5A Peak; Voltage adjustable (4.9V Default, 6V or 7.2V via jumper)
SpeedyBee F405 WING Wireless Board:
Wireless Configuration: BLE mode (connect to Speedybee APP); Wi-Fi mode (connect to QGroundControl APP, Speedybee APP, MissionPlanner); Classic Bluetooth SPP mode (connect to QGround Membeli = Setuju
Tanyakan terlebih dahulu jika ada yang kurang jelas pada iklan produk
Barang yang telah dibeli tidak dapat ditukar/dikembalikan,kecuali kesalahan dari pihak kami dalam mengirimkan produk
Harap cek ulang pesanan sebelum melakukan pembayaran. Barang yang sudah dibeli tidak dapat dibatalkan karena kesalahan pihak pembeli.
Tolong untuk lampirkan VIDEO UNBOXING (saat proses pembukaan kemasan, bukan hanya saat barang sudah dibuka) apabila hendak mengajukan komplain.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan