Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp27.000
NodeMCU ESP8266 LOLIN V3 CH340 Wifi Modul Arduino
Rp27.000
- Kondisi: Bekas
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Bekas, cuman dipake beberapa kali untuk trial program.
32-bit micro controller unit at 80 MHz (or overclocked to 160 MHz)
32 kB instruction RAM
80 kB user data RAM
16 kB ETS system data RAM
Flash Memory 4Mb
USB – micro USB port for power, programming and debugging
13 GPIO pins
802.11 b/g/n, supporting WPA/WPA2
STA / AP modes support
TCP / IP protocol stack, One socket
TCP / UDP Server and Client
Serial port baud rate configuration: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps
Pin-compatible with Arduino UNO, Mega
KEY button: modes configuration
32-bit hardware timer
WiFi operation current: continuous transmission operation: ≈70mA (200mA MAX), deep sleep mode: <3mA
Serial WiFi transmission rate: 110-460800bps
Temperature: -40℃ ~ + 125 ℃
Humidity: 10%-90% non-condensing
Weight: about 20g (0.7oz)
Pulse-Width Modulation (PWM)
Interrupt capability
3.3V operating voltage, internal voltage regulator allows 5V on power input
maximum current through GPIO pins: 12mA (source), 20mA (drain)
available firmware for Arduino IDE
Websocket libraries available
32-bit micro controller unit at 80 MHz (or overclocked to 160 MHz)
32 kB instruction RAM
80 kB user data RAM
16 kB ETS system data RAM
Flash Memory 4Mb
USB – micro USB port for power, programming and debugging
13 GPIO pins
802.11 b/g/n, supporting WPA/WPA2
STA / AP modes support
TCP / IP protocol stack, One socket
TCP / UDP Server and Client
Serial port baud rate configuration: 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps
Pin-compatible with Arduino UNO, Mega
KEY button: modes configuration
32-bit hardware timer
WiFi operation current: continuous transmission operation: ≈70mA (200mA MAX), deep sleep mode: <3mA
Serial WiFi transmission rate: 110-460800bps
Temperature: -40℃ ~ + 125 ℃
Humidity: 10%-90% non-condensing
Weight: about 20g (0.7oz)
Pulse-Width Modulation (PWM)
Interrupt capability
3.3V operating voltage, internal voltage regulator allows 5V on power input
maximum current through GPIO pins: 12mA (source), 20mA (drain)
available firmware for Arduino IDE
Websocket libraries available
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan