4.9/ 5.0
100% pembeli merasa puas
10 rating • 3 ulasan
5(9)90%
4(1)10%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 6
Subtotal
Rp120.000
Makerbase MKS UPS 12V / 24V
Rp120.000
Pilih warna: 2 warna
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: control board
Installation link:
https://www.youtube.com/watch?v=S5KErcgwdqU
Open Source File/Instructions:
https://github.com/makerbase-mks/MKS-Power-Control
Work with Lcd12864 and MKS Gen_L MKS SGen_L MKS Robin E3/E3D:
https://youtu.be/kjijfYPJccI
Work with MKS TFT35 and MKS Gen_L MKS SGen_L MKS Robin E3/E3D:
https://youtu.be/ZRHTnbK3fGM
Work with MKS Robin Nano:
https://youtu.be/ulk4YfV_e_o
Overview.
MKS UPS module is used to lift Z axis when the power off. It can remove extruder from the model to protect themode
Notice:
1. MKS UPS12V can only be used for DC12V power
2. MKS UPS24V can only be used for DC24V power.
3. Motherboard needs to use Marlin2 0 firmware with 12864/2004 CD screen
4. Temporarily does not support MKS Robin series(except Robin E3/E3D)and MKS TFT screen
5. MKS UPS12V and MKS UPS24V modules detect external AC power supply
Working process
1.When AC power supply is cut off, the MKS UPS detects it and send signal to motherboard
2. The power stored in the MKS UPS and PSU continues to supply power to the motherboard
3. Motherboard detects the power-off signal, stop printing, turn off hotbed and hotend, lift Z axis;
4. The power stored in MKS UPS is generally lift Z axis 20mm-200mm
5. When power supply is restored, resume printing through the 12864/2004 LCD screenWiringTake MKS SGEN L as an example
https://www.youtube.com/watch?v=S5KErcgwdqU
Open Source File/Instructions:
https://github.com/makerbase-mks/MKS-Power-Control
Work with Lcd12864 and MKS Gen_L MKS SGen_L MKS Robin E3/E3D:
https://youtu.be/kjijfYPJccI
Work with MKS TFT35 and MKS Gen_L MKS SGen_L MKS Robin E3/E3D:
https://youtu.be/ZRHTnbK3fGM
Work with MKS Robin Nano:
https://youtu.be/ulk4YfV_e_o
Overview.
MKS UPS module is used to lift Z axis when the power off. It can remove extruder from the model to protect themode
Notice:
1. MKS UPS12V can only be used for DC12V power
2. MKS UPS24V can only be used for DC24V power.
3. Motherboard needs to use Marlin2 0 firmware with 12864/2004 CD screen
4. Temporarily does not support MKS Robin series(except Robin E3/E3D)and MKS TFT screen
5. MKS UPS12V and MKS UPS24V modules detect external AC power supply
Working process
1.When AC power supply is cut off, the MKS UPS detects it and send signal to motherboard
2. The power stored in the MKS UPS and PSU continues to supply power to the motherboard
3. Motherboard detects the power-off signal, stop printing, turn off hotbed and hotend, lift Z axis;
4. The power stored in MKS UPS is generally lift Z axis 20mm-200mm
5. When power supply is restored, resume printing through the 12864/2004 LCD screenWiringTake MKS SGEN L as an example
Ada masalah dengan produk ini?