5.0/ 5.0
100% pembeli merasa puas
1 rating • 0 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp230.000
BigTreeTech BTT SFS V2.0 Smart Filament Sensor Detection Module V2 3D Printer Klipper
Rp230.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 3D Print dan Spare Part
The SFS V2.0 is bi-directional, there is no restriction on filament direction, giving the users more flexibility during installation.
It detects extrusion errors caused by filament runout, nozzle clogging, filament tying, and extruder trouble. It has two signal outputs and indicator lights to distinguish between clogging or filament runout.
Features:
Works with Marlin, Klipper, and RRF firmware.
Compact, lightweight, and easy to install.
Works with Bowden extruders and direct-drive extruders.
Support motherboards with available endstop ports or dedicated filament runout ports.
4 Detections
- Nozzle Clogging
- Filament Runout
- Filament Tying
- Extruder Trouble
Specifications
- Compatible ilament：All 1.75mm filaments
- Detection Length：2.88 mm (theoretical detection length, may need adjustment)
- Rated Voltage：3.3V-5V
- Working Temperature：-10 to 50 ℃
- Working Humidity：10% to 90%
- Dimensions：53.1 x 30.3 x 27.3 mm
- Mounting Hole Spacing：12.4 x 24.7 mm
- Weight：36 g
- Operating PrincipleEncoder+Pulley Set+Micro Switch
- Bi-Directional Feeding YES
- Filament Feeding Lever YES
- Status Light YES
- Mounting HolesThree mounting holes on the back
Link Github:
https://github.com/bigtreetech/smart-filament-detection-module
It detects extrusion errors caused by filament runout, nozzle clogging, filament tying, and extruder trouble. It has two signal outputs and indicator lights to distinguish between clogging or filament runout.
Features:
Works with Marlin, Klipper, and RRF firmware.
Compact, lightweight, and easy to install.
Works with Bowden extruders and direct-drive extruders.
Support motherboards with available endstop ports or dedicated filament runout ports.
4 Detections
- Nozzle Clogging
- Filament Runout
- Filament Tying
- Extruder Trouble
Specifications
- Compatible ilament：All 1.75mm filaments
- Detection Length：2.88 mm (theoretical detection length, may need adjustment)
- Rated Voltage：3.3V-5V
- Working Temperature：-10 to 50 ℃
- Working Humidity：10% to 90%
- Dimensions：53.1 x 30.3 x 27.3 mm
- Mounting Hole Spacing：12.4 x 24.7 mm
- Weight：36 g
- Operating PrincipleEncoder+Pulley Set+Micro Switch
- Bi-Directional Feeding YES
- Filament Feeding Lever YES
- Status Light YES
- Mounting HolesThree mounting holes on the back
Link Github:
https://github.com/bigtreetech/smart-filament-detection-module
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan