5.0/ 5.0
100% pembeli merasa puas
3 rating • 0 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
BigTreeTech U2C V2.1 BTT 3 Can Bus Output USB to Canbus Adapter Board 3D Printer EBB Klipper
Rp240.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 3D Print dan Spare Part
BIGTREETECH U2C V2.1
Original dari BigTreeTech
BIGTREETECH U2C is a USB to CAN bus module, which can convert the USB port of Raspberry Pi to the CAN bus, and connect the 3D printing motherboard, BTT EBB36/42 CAN and other products through CAN bus. There are many different forms of CAN interfaces on the board, which are helpful to connect to different boards.
CAN bus has many advantages in the field of industrial control, so our company has launched this USB to CAN module. The CAN bus has a long transmission distance and a large number of nodes can be mounted on it. So the motherboard, EBB, and other expansion boards can be mounted on the same CAN bus at the same time.
The difference between U2C V1.0 and U2C V2.1: U2C V1.0 has 1 CAN OUTPUT, U2C V2.1 has 3 CAN OUTPUT
Fitur :
- Support CAN bus connection, long data transmission, strong anti-noise ability strong real-time performance, and high reliability.
- The surface of the PCB adopts the ENIG process.
- The TYPE-C port is equipped with ESD protection to prevent static electricity from damaging the hardware.
- Support firmware updates for the motherboard through SWD or hardware DFU.
- More than on the CAN interface.
CAUTIONS :
1. The 12/24V and GND should not be reversed.
2.When using CAN communication, you need to see which CAN node is used as a terminal. If it is a terminal, you must plug the jumper cap at the 120R position
Termasuk 1x kabel USB to Can Bus Module
Link Github :
https://github.com/bigtreetech/candleLight_fw/tree/stm32g0_support
https://github.com/bigtreetech/EBB
Original dari BigTreeTech
BIGTREETECH U2C is a USB to CAN bus module, which can convert the USB port of Raspberry Pi to the CAN bus, and connect the 3D printing motherboard, BTT EBB36/42 CAN and other products through CAN bus. There are many different forms of CAN interfaces on the board, which are helpful to connect to different boards.
CAN bus has many advantages in the field of industrial control, so our company has launched this USB to CAN module. The CAN bus has a long transmission distance and a large number of nodes can be mounted on it. So the motherboard, EBB, and other expansion boards can be mounted on the same CAN bus at the same time.
The difference between U2C V1.0 and U2C V2.1: U2C V1.0 has 1 CAN OUTPUT, U2C V2.1 has 3 CAN OUTPUT
Fitur :
- Support CAN bus connection, long data transmission, strong anti-noise ability strong real-time performance, and high reliability.
- The surface of the PCB adopts the ENIG process.
- The TYPE-C port is equipped with ESD protection to prevent static electricity from damaging the hardware.
- Support firmware updates for the motherboard through SWD or hardware DFU.
- More than on the CAN interface.
CAUTIONS :
1. The 12/24V and GND should not be reversed.
2.When using CAN communication, you need to see which CAN node is used as a terminal. If it is a terminal, you must plug the jumper cap at the 120R position
Termasuk 1x kabel USB to Can Bus Module
Link Github :
https://github.com/bigtreetech/candleLight_fw/tree/stm32g0_support
https://github.com/bigtreetech/EBB
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan