5.0/ 5.0
100% pembeli merasa puas
30 rating • 3 ulasan
5(30)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 256
Subtotal
Rp6.750
Modul HX711 Loadcell HX 711 Load Cell Weight Sensor Berat ADC Module
Rp6.750
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Modul Mikrokontroller Sensor
Modul HX711 ini berfungsi sebagai amplifier / penguat hasil pembacaan sensor berat / loadcell. Sehingga dengan module ini kita dapat membaca hasil pengukuran berat dari Load Cell Atau sensor berat menggunakan mikrokontroler seperti Arduino atau Raspberry PI.
Kabel:
- Red (Excitation+ or VCC)
- Black (Excitation- or GND)
- White (Amplifier+, Signal+, or Output+)
- Green (A-, S-, or O-)
Spesifikasi:
- Differential input voltage: 40mV (Full-scale differential input voltage is 40mV)
- Operation Voltage: 2.7V-5V DC
- Dual-Channel 24 Bit
- Selectable 10SPS or 80SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- For Loadcell
Overview
HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output. The module communicates with the host computer through TTL 232.
Application
Widely used in aerospace, mechanical, electrical, chemical, construction, medicine and many other fields, used to measure force, pressure, displacement, strain, torque, acceleration.
Advantages
Simple structure, easy to use, stable and reliable performance, high sensitivity and measurement speed and so on.
Kabel:
- Red (Excitation+ or VCC)
- Black (Excitation- or GND)
- White (Amplifier+, Signal+, or Output+)
- Green (A-, S-, or O-)
Spesifikasi:
- Differential input voltage: 40mV (Full-scale differential input voltage is 40mV)
- Operation Voltage: 2.7V-5V DC
- Dual-Channel 24 Bit
- Selectable 10SPS or 80SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- For Loadcell
Overview
HX711 is an electronic scale module, whose working principle is to convert the measured changes in resistance value changes, through the conversion circuit into electrical output. The module communicates with the host computer through TTL 232.
Application
Widely used in aerospace, mechanical, electrical, chemical, construction, medicine and many other fields, used to measure force, pressure, displacement, strain, torque, acceleration.
Advantages
Simple structure, easy to use, stable and reliable performance, high sensitivity and measurement speed and so on.
Ada masalah dengan produk ini?