Fluke 700PTP-1

Fluke 700PTP-1 Pneumatic Test Pump

The Fluke-700PTP-1 pneumatic test pump can provide pressures up to 600 psi (40 bar).

Can be used for 700 series pressure modules or test pressure gauges. It can be directly connected to the reference port, thus combining the two devices into one when performing calibration and testing. It can also be used in conjunction with the 717 pressure calibrator. Suitable for calibrating pressure transmitters, pressure switches and pressure gauges up to 600 psi/40 bar.

· The pump can be cleaned easily without disassembly

· The fine adjustment knob can be used as an independent low pressure calibration source

· Two pressure ports that can be connected at the same time:

· 1/4 in. NPT female connector for reference pressure gauge or pressure module

· 1/4 in. NPT female connector for the device under test

· Adjustable stroke length can be set to limit the pressure of each stroke

include:

· 1/4 in. NPT male to 1/4 in. BSP female

· 1 meter hose

· 2 1/8 in. NPT male quick couplings

· 1/8 in. NPT female to 1/4 in. BSP female

· Sealing kit

· user's manual

Mechanical and general parameters

size


Length 8.7 in (220 mm), width 4.8 in (122 mm), depth 3.5 in (89 mm)


weight


1.03 lb (467 g)


warranty period


One year