Atur jumlah dan catatan
Stok Total: 514
Subtotal
Rp272.120
MCP23017 Serial Interface Module IIC I2C SPI MCP23S17 Bidirectional 16-Bit I/O Expander Pins 10Mhz Serial Interface Module
Rp272.120
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat Datang Di Toko Kami
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : AITEXM ROBOT
Model Number : MCP23017
Origin : Mainland China
Type : Voltage Regulator
Supply Voltage : 1
Dissipation Power : 1
Operating Temperature : 1
is_customized : Yes
Condition : New
Black Version
16-Bit Remote Bidirectional I/O Port:
- I/O pins default to inputHigh-Speed I2C Interface (MCP23017):- 100kHz- 400kHz- 1.7MHzHigh-Speed SPI Interface (MCP23S17):- 10 MHz (maximum)Three Hardware Address Pins to Allow Up toEight Devices On the BusConfigurable Interrupt Output Pins:- Configurable as active-high, active-low oropen-drainINTA and INTB Can Be Configured to OperateIndependently or TogetherConfigurable Interrupt Source:- Interrupt-on-change from configured registerdefaults or pin changesPolarity Inversion Register to Configure thePolarity of the Input Port DataExternal Reset InputLow Standby Current: 1 A (max.)Operating Voltage:- 1.8V to 5.5V @ -40C to +85C- 2.7V to 5.5V @ -40C to +85C- 4.5V to 5.5V @ -40C to +125C
Green
Version
1. Description:
This module is the 16 way IO extension module of the 12C interface, and built in the MCP23017 chip of MicroChip. The function of the chip is complete. Each IO can be arbitrarily configured as input or output, and a pull up resistor can be set, and the interrupt function can be enabled for the IO configured as input. The IO interface has a strong driving capacity, and the current and current can reach 25mA. MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz and 1.7MHz. The chip has 3 address pins, which can be set up for 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions. This module is flexible in configuration and strong in driving ability. There are many parallel connections.
2. Parameters:
No.
Parameter
Value
1
Operating voltage
3.0V-5.5V
2
Drive chip
MCP23017
3
Number of IO
16 (input, output, interruption)
4
Drive power supply
25mA1
5
12C frequency
100KHz, 400KHz, 1..7MHz
6
working temperature
-40 Celsius -125 Celsius
7
Chip level
Industrial grade
8
Parallel multiple
Up to 8
9
Driver
51 and Arduino
10
Module size
65mm*19mm
3. Pin description:
No.
Pin
Function
Remark
1
VCC
Power source input
3.0V-5.5V
2
GND
Power negative electrode
0V
3
SCL
12C clock line
SCL connecting single chip IO pin or MCU 12C interface
4
SDA
12C data line
SDA connecting single chip IO pin or MCU 12C interface
5
RST
Chip reduction
Low level effective, connecting MCU IO pin or unconnected
6
ITA
GPIOA port interrupt output
Connect MCU IO pin, without connection when interruption
7
ITB
GPIOB port interrupt output
Connect MCU IO pin, without connection when interruption
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : AITEXM ROBOT
Model Number : MCP23017
Origin : Mainland China
Type : Voltage Regulator
Supply Voltage : 1
Dissipation Power : 1
Operating Temperature : 1
is_customized : Yes
Condition : New
Black Version
16-Bit Remote Bidirectional I/O Port:
- I/O pins default to inputHigh-Speed I2C Interface (MCP23017):- 100kHz- 400kHz- 1.7MHzHigh-Speed SPI Interface (MCP23S17):- 10 MHz (maximum)Three Hardware Address Pins to Allow Up toEight Devices On the BusConfigurable Interrupt Output Pins:- Configurable as active-high, active-low oropen-drainINTA and INTB Can Be Configured to OperateIndependently or TogetherConfigurable Interrupt Source:- Interrupt-on-change from configured registerdefaults or pin changesPolarity Inversion Register to Configure thePolarity of the Input Port DataExternal Reset InputLow Standby Current: 1 A (max.)Operating Voltage:- 1.8V to 5.5V @ -40C to +85C- 2.7V to 5.5V @ -40C to +85C- 4.5V to 5.5V @ -40C to +125C
Green
Version
1. Description:
This module is the 16 way IO extension module of the 12C interface, and built in the MCP23017 chip of MicroChip. The function of the chip is complete. Each IO can be arbitrarily configured as input or output, and a pull up resistor can be set, and the interrupt function can be enabled for the IO configured as input. The IO interface has a strong driving capacity, and the current and current can reach 25mA. MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz and 1.7MHz. The chip has 3 address pins, which can be set up for 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions. This module is flexible in configuration and strong in driving ability. There are many parallel connections.
2. Parameters:
No.
Parameter
Value
1
Operating voltage
3.0V-5.5V
2
Drive chip
MCP23017
3
Number of IO
16 (input, output, interruption)
4
Drive power supply
25mA1
5
12C frequency
100KHz, 400KHz, 1..7MHz
6
working temperature
-40 Celsius -125 Celsius
7
Chip level
Industrial grade
8
Parallel multiple
Up to 8
9
Driver
51 and Arduino
10
Module size
65mm*19mm
3. Pin description:
No.
Pin
Function
Remark
1
VCC
Power source input
3.0V-5.5V
2
GND
Power negative electrode
0V
3
SCL
12C clock line
SCL connecting single chip IO pin or MCU 12C interface
4
SDA
12C data line
SDA connecting single chip IO pin or MCU 12C interface
5
RST
Chip reduction
Low level effective, connecting MCU IO pin or unconnected
6
ITA
GPIOA port interrupt output
Connect MCU IO pin, without connection when interruption
7
ITB
GPIOB port interrupt output
Connect MCU IO pin, without connection when interruption
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan