[JYHB] - BetaFPV F4 1S 12A AIO FC ESC ExpressLRS 2.4Ghz ELRS Flight

BARANG READY KAK, SILAHKAN DI ORDER. -------------VERSI 2.2 F4 1S 12A AIO Brushless Flight Controller V2.2 is the default FC for Cetus X brushless whoop quadcopter, also great for 85mm whoop drones like Meteor85 and 3 #34; toothpick drones like HX115 SE Toothpick Drone and HX115 LR Toothpick Drone. We updated the FC to V2.2 with BMI270 gyro and BB51 ESC hardware in place of ICM20689 gyro and BB21 ESC hardware. Specification of FC Item: F4 1S 12A AIO FC Weight: 4.74 g (without power cable and BT2.0 connector) CPU: STM32F411CEU6 (100MHZ ) Six-Axis: BMI270 (SPI connection) Firmware version: betaflight_4.3.1_BETAFPVF4SX1280 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: SPI ELRS 2.4G Receiver Motor Pin Connector: 1.25mm Header Pins Mounting Hole Size: 26mm x 26mm (suitable for whoop pattern mounting hole) USB Port: SH1.0 4-Pin Specification of 1S 12A ESC Built-in ESC with 12A continuous and peak 25A current Input voltage: 1S-2S ESC firmware: C_X_30_REV16_7.hex for BB51 BLHeli_S hardware Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM The BLHeli_S firmware could support the BB51 hardware now. This V2.2 board is powered by BB51 hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator. NOTE : - JIKA WARNA YG DI CANTUMKAN KOSONG MAKA KAMI KIRIMNYA RANDOM!! - MOHON KIRIM VIDEO UNBOXING SAAT KOMPLAIN PRODUK - JIKA ADA PERTANYAAN ATAU KESALAHAN DALAM IKLAN INI SILAHKAN CHAT ADMIN KAMI. TERIMAKASIH. SELAMAT BERBELANJA.