Atur jumlah dan catatan
Stok Total: Sisa 5
Subtotal
Rp137.500
Dimmer PWM 40A DC Soft Start Stall Protection 12V 24V 36V (1503)
Rp137.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Dimmer Speed controller
Dimmer PWM 40A DC Soft Start Stall Protection 12V 24V 36V (1503)
Input voltage: DC10-55V
Output voltage: Linear under load
Input current: required to be larger than the motor operating current
Output current: determined by load size Continuous current
Power conversion: 2000W (power etc. and voltage*current)
Quiescent current: 0.01ma
Speed regulation type: Current regulation
Speed adjustment method: ON\OFF linear potentiometer 270 degrees
Speed adjustment range: 0-100%
Working frequency: 15KHZ
Wiring type: barrier type terminal block Body size: 85mm*58mm*38mm Product net weight: 135g
Product Features:
1. Soft Start! Stall protection! Low voltage protection!
2. Motor Characteristics: Large instantaneous current at startup. Infinite locked-rotor current.
3. Soft start can solve the damage caused by instantaneous large current to the speed regulator and motor.
4. Stalled-rotor protection (current limiting system) can limit the high current generated by motor locked-rotor.
5. Product updates add low voltage. Protection (10V) If it is powered by a battery, it is very good to prevent over-discharge damage
Note: stall protection is not a power outage, but a current limit. The current limit value is 30A.
Note: The input must be divided into positive and negative, and household electricity 220V cannot be input.
The input voltage should be equal to the rated voltage of the motor. For example, the motor is 12V input, 12V DC motor, 36V input 36V DC.
Input voltage: DC10-55V
Output voltage: Linear under load
Input current: required to be larger than the motor operating current
Output current: determined by load size Continuous current
Power conversion: 2000W (power etc. and voltage*current)
Quiescent current: 0.01ma
Speed regulation type: Current regulation
Speed adjustment method: ON\OFF linear potentiometer 270 degrees
Speed adjustment range: 0-100%
Working frequency: 15KHZ
Wiring type: barrier type terminal block Body size: 85mm*58mm*38mm Product net weight: 135g
Product Features:
1. Soft Start! Stall protection! Low voltage protection!
2. Motor Characteristics: Large instantaneous current at startup. Infinite locked-rotor current.
3. Soft start can solve the damage caused by instantaneous large current to the speed regulator and motor.
4. Stalled-rotor protection (current limiting system) can limit the high current generated by motor locked-rotor.
5. Product updates add low voltage. Protection (10V) If it is powered by a battery, it is very good to prevent over-discharge damage
Note: stall protection is not a power outage, but a current limit. The current limit value is 30A.
Note: The input must be divided into positive and negative, and household electricity 220V cannot be input.
The input voltage should be equal to the rated voltage of the motor. For example, the motor is 12V input, 12V DC motor, 36V input 36V DC.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan