CO Moving Beam 251 New Version 3 ALPHA LED

Silahkan baca deskripsi dan catatan toko kami membeli = setuju dengan catatan toko kami.. dan jika barang yg di inginkan tidak ada bisa request produk,akan admin carikan produk yg di inginkan..transparasi harga terjamin Moving Beam 251 Original Safety Precaution In order to guarantee the product #39;s life, please don #39;t put it in the damp places or even the environment over 60degress. Always mount this unit in safe and stable matter. Install or dismantle should operate by professional engineer. Using lamp, the change rate of power voltage should be within 10%, If the voltage is too high, it will shorten the light #39;s life; If it #39;s not enough, will influence the effect. Please restart it 20 minutes later after turning off light, until full-cooling. Frequent switching will reduce the life span of lamps and bulbs; intermittent using will improve the life of bulbs and lamps. In order to make sure the product is used well, please read the Manual carefully. Cable connection (DMX) Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 1200hm characteristic impedance, 22-24AWG,low capacity. Do not use microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 3 or 5-pin male/female connectors. A terminating plug must be inserted into the last projector with a resistance of 1200hm (minimum 1/4 W) between terminals 2 and 3. connectors. ABADIKAN VIDEO UNBOXING