2008-2017 Bonnet Lift Support For Mitsubishi Lancer ex 2009 2010 2011

Other Part Number : Lift Support Placement on Vehicle : Bonnet Strut Bars Country/Region of Manufacture : china Interchange Part Number : Strut Bars Special Features : Bonnet Hood Support Struts Material Type : steel Item Weight : 0.9kg Item Height : 0cm Item Width : 0cm Item Length : 0cm Manufacturer Part Number : 0 Origin : Mainland China OEM NO. : 0 suitable 1 : For Mitsubishi Lancer ex 2008-2017 package : 2pcs item name : Bonnet Hood Support Struts name : Lift Support position : Bonnet Strut Bars Description item name:Bonnet Hood Support Struts, Lift Support Suitable: For Mitsubishi Lancer ex 2008-2017 HOW TO INSTALL 1. Check the place where we need to install. 2. Use a 12mm socket to remove the screw from your car. 3. Install the original screw back the elements as the picture. 4. Fasten the screw. 5. Install the screw and the fixed piece as the picture. 6. Put the screw in step 5 into the hole, then pull it alightly hareder, while fasten. 7. Use 12mm open and wrench to fasten the screw. 8. Install the lift support, and put the thick side into the fixed piece. 9. Put the thin side into the fixed piece in the cabin. Summary of advantage 1.Double-layer oil seal, long life 2. High quality carbon steel 3.Thick stroke rod, solid design 4.Not afraid of severe cold 5.Low temperature wear-resistant hydraulic oil 6.No punching, easy to install 7. Passed quality certification and testing Why we need struts? Before 1. Not firm: The original car single pole support is not firm 2. Hood hot 3. Open hard:Not enough height or strength to open the hood 4. Easy drop:The original car support rod: easy to get dirty, easy to drop, inconvenie