IP2368 Bidirectional 100w Fast Charging Module Buck-Boost Type-c

Origin : Mainland China Output Interface : Type-C The bidirectional C port of the product can only be connected to one-way electrical appliances or chargers, such as charging heads, mobile phones and other electrical appliances. It is forbidden to link the module of the two-way C port to the two-way C port, which may cause frequent switching between modules to be unrecognized, and it may be seriously damaged With Bidirectional buck-boost function The module has a bidirectional buck-boost function, and can output a fixed 5V or 20V regardless of the battery voltage change. It should be noted that 100W must have a charge and discharge voltage of 20V, and if the output of 12V can only reach a maximum of 3A current, that is, 36W. Modify the battery parameter description IP2368 supports 2/3/4/5/6 series cells, the number of battery series cells can be selected through external resistance: IP2368 supports external resistance to choose ordinary lithium battery or lithium iron phosphate battery, external resistance can be set to full voltage, lithium battery full voltage can be set to: 4.15V/4.2V/4.3V/4.35V/4.4V, lithium iron phosphate battery full voltage can be set to: 3.5V/3.55V/3.6V/3.65V/3.7V. Specific modification method: R2 suspension = ordinary lithium battery, R2 short = lithium iron phosphate battery R7 sets the number of battery strings: 6.2k=2 strings, 9.1k=3 strings, 13k=4 strings, 18k=5 strings, 27k=6 strings R5 Set the battery capacity: as shown in the table below High-quality material selection, better effect The product adopts the largest 17*17mm inductor in the industry, which dissipates heat quickly, has low heat generation and higher cost. The product comes with 4 LED lights, which can display the power level. It both glows when input and output. The rear screw hole provides power Multiple layers can be stacked The product is small in size and