High Speed Xilinx Programmer USB Downloader JTAG SMT2 Blaster

𝐒𝐞𝐥𝐚𝐦𝐚𝐭 𝐃𝐚𝐭𝐚𝐧𝐠 𝐝𝐢 𝐓𝐨𝐤𝐨 𝐎𝐧𝐥𝐢𝐧𝐞 𝐊𝐚𝐦𝐢

[Garansi 1 Bulan]

Xilinx spartan 6 FPGA:

The target device download clock can be selected, and the XILINX software can be automatically adjusted
Adopt special wide voltage level conversion and interface chip, the isolation is fully integrated to avoid the burning of the chip caused by the charged plug
Double color LED status indicator, orange indicates that the download and PC connection are normal, green indicates that the target board power supply is already supplied and connected with the loader
Adopt JTAG-SMT2 solution

Package Includes:
1 x Newest platform cable USB
1 x 14-pin 2.54mm pitch 15cm flat cable
1 x USB cable

The Platform Cable USB ,a USB compatible cable for in-circuit configuration and programming of all Xilinx devices.It derives all operating power from the hub port controller. No external power supply is required. A sustained slave-serial FPGA configuration transfer rate of 24 Mb/s is possible in a Hi-Speed USB environment.


Performance:

Using CY7C68013A+XC2C256 solution, fully compatible with the original XILINX Platform Cable USB

Supports all Xilinx devices, FPGA configuration and PROM/CPLD programming

Supports JTAG, Slave-Serial and SPI

Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V

Selectable target clock frequency, supports software automatic frequency adjustment

Supported on Windows and Red Hat Enterprise Linux

Automatically senses and adapts to target I/O voltage

LED Status Indicator

Target clock speeds are selectable from 750 kHz to 24 MHz.


Supported Software

Xilinx ISE 8 to ISE 14.7 and up-to-date ISE software

Xilinx Vivado

IMPACT

ChipScope

Microblaze embedded processor debugging


Supported Device:


All Xilinx devices, FPGA and PROM/CPLD:

All Virtex-FPGA families

All Spartan-FPGA families


CoolRunnerXPLA3 / CoolRunner-II CPLDs

𝐁𝐚𝐫𝐚𝐧𝐠 𝐤𝐚𝐦𝐢 𝐫𝐞𝐚𝐝𝐲 𝐬𝐭𝐨𝐜𝐤.

Silahkan Langsung di Order, 100 % REAL PICTURE

𝐁𝐞𝐥𝐢 = 𝐒𝐞𝐭𝐮𝐣𝐮!
𝐀𝐧𝐝𝐚 𝐏𝐮𝐚𝐬, 𝐅𝐞𝐞𝐝𝐛𝐚𝐜𝐤 𝐏𝐥𝐬