4.9/ 5.0
98% pembeli merasa puas
52 rating • 12 ulasan
5(51)98.08%
4(0)0%
3(0)0%
2(0)0%
1(1)1.92%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
FLYWOO X30 Waterproof Superhydrophobic Invisible Spray
Rp399.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Flywoo
Penting, baca cara penggunaan secara seksama dan ikuti instruksi yg diberikan
Operating Instructions:
Cleaning: Before the coating operation, make sure to throughly remove the dust and oil stains on the substrate surface.
Maintenance or recoating: This product has excellent recoating performance. If re-coating is needed, clean the surface and reapply directly at the corresponding position.
Note:
- Use a dedicated circuit board cleaning solution to throughly clean the board
- Allow each layer to dry before applying the next one
- To achieve the best waterproof effect, it is recommended to spray repeatedly for 2 - 3 times
- Before use, please shake it to maintain the uniformity of the liquid
- After spraying, the surface drying time is approximately 2 - 3 minutes. The surface can meet daily use requirements after drying
- Don't let your circuit board be immersed in water for long when powered on
Application Scope:
- Covering all circuit boards (Flight Controller, Electronic Speed Controller, Video Transmitter, O3, etc
- Glass materials such as lenses (Can effectively prevent water droplets from adhering, but it will reduce the permeability by 30%. If dissatisfied after application, it can be wiped clean)
- Plugs on all circuit boards
- Plugs on the battery
Specifications:
Product Name: Flywoo X30 Waterproof Superhydrophobic Invisible Spray
Capacity: 56.7g (For example: Flywoo GOKU F722 PRO Mini V2 20X20 Flight Controller double-sided spray 3 times, need to use 2.5g)
Color: Milky white
Relative density (g/cm³, 25℃) : 1.56 ± 0.3
Water repellency angle：>160°
Material: Superhydrophobic material
Volatility: Non-volatile
Purpose: Used for waterproofing, short-circuit prevention, corrosion resistance, salt spray protection, mold resistance, dust prevention, and heat dissipation in electronic products.
Weight：67.2g
Operating Instructions:
Cleaning: Before the coating operation, make sure to throughly remove the dust and oil stains on the substrate surface.
Maintenance or recoating: This product has excellent recoating performance. If re-coating is needed, clean the surface and reapply directly at the corresponding position.
Note:
- Use a dedicated circuit board cleaning solution to throughly clean the board
- Allow each layer to dry before applying the next one
- To achieve the best waterproof effect, it is recommended to spray repeatedly for 2 - 3 times
- Before use, please shake it to maintain the uniformity of the liquid
- After spraying, the surface drying time is approximately 2 - 3 minutes. The surface can meet daily use requirements after drying
- Don't let your circuit board be immersed in water for long when powered on
Application Scope:
- Covering all circuit boards (Flight Controller, Electronic Speed Controller, Video Transmitter, O3, etc
- Glass materials such as lenses (Can effectively prevent water droplets from adhering, but it will reduce the permeability by 30%. If dissatisfied after application, it can be wiped clean)
- Plugs on all circuit boards
- Plugs on the battery
Specifications:
Product Name: Flywoo X30 Waterproof Superhydrophobic Invisible Spray
Capacity: 56.7g (For example: Flywoo GOKU F722 PRO Mini V2 20X20 Flight Controller double-sided spray 3 times, need to use 2.5g)
Color: Milky white
Relative density (g/cm³, 25℃) : 1.56 ± 0.3
Water repellency angle：>160°
Material: Superhydrophobic material
Volatility: Non-volatile
Purpose: Used for waterproofing, short-circuit prevention, corrosion resistance, salt spray protection, mold resistance, dust prevention, and heat dissipation in electronic products.
Weight：67.2g
Ada masalah dengan produk ini?