- Home
- Mainan & Hobi
- Mainan Remote Control
- Part RC
Happymodel ExpressLRS ELRS 2.4G EP2 Long Range RC Receiver for ES24TX
Funstation
Tambah CatatanHappymodel ExpressLRS ELRS 2.4G EP2 Long Range RC Receiver for ES24TX
Terjual 90+
rating 5 (63 ulasan)
Rp175.000
Detail
- Kondisi: Baru
- Berat: 50 Gram
- Kategori: Part RC
- Etalase: Happymodel Products
Menggunakan IC Regulator terbaru (SETH), IC sebelumnya menggunakan SDG yg di bbrp kasus memiliki masalah panas yg berlebihan dan masalah saat booting (nyala awal)
Gratis 4 kabel beda warna masing2 10cm sehingga memudahkan anda agar tdk perlu membeli kabel terpisah
The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple .
Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
Specifications:
EP2_RX
Specifications:
Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
SMD Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.44gram
Dimension: 10mm*10mm*6mm
Peak gain: 3.7dB
Gratis 4 kabel beda warna masing2 10cm sehingga memudahkan anda agar tdk perlu membeli kabel terpisah
The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.
The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.
On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that’s too simple .
Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.
Specifications:
EP2_RX
Specifications:
Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
SMD Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.44gram
Dimension: 10mm*10mm*6mm
Peak gain: 3.7dB
Zerius
Online 1 jam lalu
4.9rata-rata ulasan
± 4 jampesanan diproses
Penawaran Lainnya
Paylater & Cicilan
Beli sekarang, bayar akhir bulan atau 30 hari lagi
Ada masalah dengan produk ini?
Ulasan(63)
Happymodel ExpressLRS ELRS 2.4G EP2 Long Range RC Receiver for ES24TX
