Happymodel Mobula8 DJI O3 Lite Version 2S 85mm 2inch Mobula 8

Beli DJI O3 nya disini
https://tokopedia.link/Z5Q8Iw2dBAb

Baterenya
https://tokopedia.link/YGsYCyO8IAb

Propeller Cadangannya
https://tokopedia.link/jFonyowhhCb

ND Filternya
https://tokopedia.link/HyL16thdBAb
https://tokopedia.link/YHuD55IdtBb

The Mobula8 is Happymodel's first attempt at an 85mm frame! This whoop comes with a Crazy F405 ELRS HD flight controller, EX1103 KV11000 motors, and Gemfan Hurricane 2023 tri-blade propellers, which have excellent power performance and extremely smooth flight characteristics. The perfect backyard ripper!

Specifications
Item Name: Mobula8 HD Drone 1-2S
Size: 120mm*120mm*50mm
Wheelbase: 85mm

FC:
MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
Power supply: 1-2S battery input (DC 2.9V-8.7V)
GYRO Sensor: BMI270
Built-in 12A(each) Blheli_S 4in1 ESC
Mount hole size: 25.5mm*25.5mm
Built-in Serial ExpressLRS 2.4G
Model: Crazy F405 ELRS HD
Built-in BMP280 Barometer
Built-in 8MBp black box

ONBOARD UART ELRS 2.4GHZ RX:
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
Could update firmware via ExpressLRS configurator
Antenna: enameled copper wire 31mm length
Default firmware version: ExpressLRS V3.0.1
Firmware target: HappyModel EP 2400 RX
RF Frequency: 2.4GHz

4IN1 ESC
Current: 12A continuous peak 15A (3 seconds)
Factory firmware: Bluejay ESC V0.19
Support BLHeli_S Bluejay firmware
Power supply: 1-2S LiPo/LiPo HV
Default protocol: DSHOT300
Firmware target: Z-H-30
*When using 1s battery and high KV 0702/0802 motors, should set the startup power to 1100/1200

MOTORS
Dimension:Φ13.5mm*15.5mm
Mode: EX1103 KV11000
Shaft Diameter:Φ1.5mm
No.of Cells(Lipo):1-2S
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Weight(g):3.8g

Recommended (Not Included)
2S Battery: 450mah

Includes
1x Happymodel Mobula8 1-2S 85mm without VTX or Camera
1x Gemfan Hurricane 2023 Tri-blade propellers (4CW+4CCW)
1x Spare Mount Bracket for O3
1x Screwdriver
2x Antenna