5.0/ 5.0
100% pembeli merasa puas
16 rating • 5 ulasan
5(16)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
SpeedyBee F405 AIO 40A 3-6S BlueJay Flight Controller INAV Support
Rp925.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: SpeedyBee
Product Name: SpeedyBee F405 AIO
MCU: STM32F405
Gyro: ICM-42688P
USB Port: Type-C
Barometer: SPA06-003
OSD: Supported
Bluetooth BLE: Supported, Bluetooth speed enhancement - 2.0
Wireless FC Firmware Update: Supported (no need to press physical BOOT button)
DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering
Flash (for BlackBox): 8MB
Input Voltage: 3S-6S LiPo battery
4V5 Output: Two 4V5 outputs; total current 1A
5V BEC Output: Three 5V outputs; total current 2A; shared with 4V5
9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
UARTS: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
I2C: Supported
LED Pads: Supported, used to control WS2812 LED lights
Buzzer Pads: Supported, BZ+ and BZ- pads
BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
Supported FC Firmware: BetaFlight (Default), INAV
Firmware Target Name: SPEEDYBEE F405AIO
Mounting: 25.5 x 25.5mm, 2mm hole diameter
Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)
Weight: 13.6g (including CNC)
ESC
Product Name: SpeedyBee F405 AIO
Input Voltage: 3-6S LiPo battery
Continuous Current: 40A
Burst Current: 45A (10s)
ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors, please use with caution.
Output Voltage: VBAT battery voltage (used to power the flight controller)
Current Sensor: Supported (Scale = 254, Offset = 0)
Firmware: Bluejay JH-40 48kHz
MCU: STM32F405
Gyro: ICM-42688P
USB Port: Type-C
Barometer: SPA06-003
OSD: Supported
Bluetooth BLE: Supported, Bluetooth speed enhancement - 2.0
Wireless FC Firmware Update: Supported (no need to press physical BOOT button)
DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering
Flash (for BlackBox): 8MB
Input Voltage: 3S-6S LiPo battery
4V5 Output: Two 4V5 outputs; total current 1A
5V BEC Output: Three 5V outputs; total current 2A; shared with 4V5
9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A
UARTS: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])
I2C: Supported
LED Pads: Supported, used to control WS2812 LED lights
Buzzer Pads: Supported, BZ+ and BZ- pads
BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery
Supported FC Firmware: BetaFlight (Default), INAV
Firmware Target Name: SPEEDYBEE F405AIO
Mounting: 25.5 x 25.5mm, 2mm hole diameter
Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)
Weight: 13.6g (including CNC)
ESC
Product Name: SpeedyBee F405 AIO
Input Voltage: 3-6S LiPo battery
Continuous Current: 40A
Burst Current: 45A (10s)
ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors, please use with caution.
Output Voltage: VBAT battery voltage (used to power the flight controller)
Current Sensor: Supported (Scale = 254, Offset = 0)
Firmware: Bluejay JH-40 48kHz
Ada masalah dengan produk ini?