4.9/ 5.0
100% pembeli merasa puas
31 rating • 12 ulasan
5(29)93.55%
4(2)6.45%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
SpeedyBee F405 V3 30x30 Flight Controller with Bluetooth + WiFi FC
Rp575.000
Pilih variant: 2 variant
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Flight Controller
Ada 2 pilihan variant:
1. With Box - dipacking dgn kardus original segel dari SpeedyBee
2. Without Box - FC diambil dari paketan FC ESC Stack, sehingga dipacking dgn kardus lain / kardus speedybee jika beruntung msh ada stoknya, tp tdk segel. Keaslian, isi paket dan barang tetap dijamin asli, hanya saja yg didpt kabel esc nya hanya 1pcs (yg panjang)
Pasangan ESC nya :
https://tokopedia.link/N6XibPp8kub
FC ESC Stacknya disini :
https://tokopedia.link/yIdXpUr8kub
Parameters:
SpeedyBee F405 V3 Flight Controller
MCU: STM32F405
IMU (gyroscope): BMI270
USB Port Type: Type C
Barometer: Internal
OSD Chip: AT7456E Chip
BLE Bluetooth: Support, for parameter tuning
DJI Air Unit Connection Method: Support 6pin socket direct connection, welding wire connection two ways
MicroSD Card Slot Blackbox: Support, please use a MicroSD card of SDSC/SCHC type below 4GB, which must be formatted in FAT16/FAT32 format. Do not use SDXC type cards. Note: Betaflight only supports up to 4GB
Galvanometer Input: Supported. When paired with SpeedyBee BLS 50A ESC, please set Scale=386, Offset=0
Betaflight camera parameter adjustment pad: Support (front CC pad)
Power input: 3S - 6S Lipo (Through the 8pin interface on the back or the G, BAT pins/pads in the pads)
ESC signal: M1-M4 on the back and M5-M8 on the front
UART serial port: five groups of serial ports (UART1, UART2, UART3, UART4 , UART6)
ESC telemetry input: R4 (UART4)
I2C: Support. SDA, SCL pads on the front. For magnetometers, sonar, etc
Legacy Betaflight LED Pads: Supported. 5V, G, LED strip on the bottom of the front
Buzzer: Support
Supported flight controller firmware: BetaFlight (default), EMUFlight, INAV
Firmware target name: SPEEDYBEEF405V3
Mount: 30.5x30.5mm (4mm hole diameter)
Dimensions: 41.6(L) x 39.4(W) x 7.8(H) mm
Weight: 9.6g
Package Included:
SpeedyBee F405 V3
Accessories
1. With Box - dipacking dgn kardus original segel dari SpeedyBee
2. Without Box - FC diambil dari paketan FC ESC Stack, sehingga dipacking dgn kardus lain / kardus speedybee jika beruntung msh ada stoknya, tp tdk segel. Keaslian, isi paket dan barang tetap dijamin asli, hanya saja yg didpt kabel esc nya hanya 1pcs (yg panjang)
Pasangan ESC nya :
https://tokopedia.link/N6XibPp8kub
FC ESC Stacknya disini :
https://tokopedia.link/yIdXpUr8kub
Parameters:
SpeedyBee F405 V3 Flight Controller
MCU: STM32F405
IMU (gyroscope): BMI270
USB Port Type: Type C
Barometer: Internal
OSD Chip: AT7456E Chip
BLE Bluetooth: Support, for parameter tuning
DJI Air Unit Connection Method: Support 6pin socket direct connection, welding wire connection two ways
MicroSD Card Slot Blackbox: Support, please use a MicroSD card of SDSC/SCHC type below 4GB, which must be formatted in FAT16/FAT32 format. Do not use SDXC type cards. Note: Betaflight only supports up to 4GB
Galvanometer Input: Supported. When paired with SpeedyBee BLS 50A ESC, please set Scale=386, Offset=0
Betaflight camera parameter adjustment pad: Support (front CC pad)
Power input: 3S - 6S Lipo (Through the 8pin interface on the back or the G, BAT pins/pads in the pads)
ESC signal: M1-M4 on the back and M5-M8 on the front
UART serial port: five groups of serial ports (UART1, UART2, UART3, UART4 , UART6)
ESC telemetry input: R4 (UART4)
I2C: Support. SDA, SCL pads on the front. For magnetometers, sonar, etc
Legacy Betaflight LED Pads: Supported. 5V, G, LED strip on the bottom of the front
Buzzer: Support
Supported flight controller firmware: BetaFlight (default), EMUFlight, INAV
Firmware target name: SPEEDYBEEF405V3
Mount: 30.5x30.5mm (4mm hole diameter)
Dimensions: 41.6(L) x 39.4(W) x 7.8(H) mm
Weight: 9.6g
Package Included:
SpeedyBee F405 V3
Accessories
Ada masalah dengan produk ini?