SpeedyBee F405 V3 50A BLS 3-6S FC ESC Stack with Bluetooth + WiFi

No WiFi,revisi judul tdk bs diganti
FC Only:
https://tokopedia.link/VJ2epZq8kub

ESC Only:
https://tokopedia.link/N6XibPp8kub

Parameters:
SpeedyBee F405 V3 Flight Controller
MCU: STM32F405
IMU (gyroscope): BMI270
USB Port Type: Type C
Barometer: Internal
OSD Chip: AT7456E Chip
BLE Bluetooth: Support, for parameter tuning
DJI Air Unit Connection Method: Support 6pin socket direct connection, welding wire connection two ways
MicroSD Card Slot Blackbox: Support, please use a MicroSD card of SDSC/SCHC type below 4GB, which must be formatted in FAT16/FAT32 format. Do not use SDXC type cards. Note: Betaflight only supports up to 4GB
Galvanometer Input: Supported. When paired with SpeedyBee BLS 50A ESC
Betaflight camera parameter adjustment pad: Support (front CC pad)
Power input: 3S - 6S Lipo
ESC signal: M1-M4 on the back and M5-M8 on the front
UART serial port: five groups of serial ports (UART1, UART2, UART3, UART4 , UART6)
ESC telemetry input: R4 (UART4)
I2C: Support. SDA, SCL pads on the front. For magnetometers, sonar, etc
Legacy Betaflight LED Pads: Supported. 5V, G, LED strip on the bottom of the front
Buzzer: Support
Supported flight controller firmware: BetaFlight (default), EMUFlight, INAV
Firmware target name: SPEEDYBEEF405V3
Mount: 30.5x30.5mm (4mm hole diameter)
Dimensions: 41.6(L) x 39.4(W) x 7.8(H) mm
Weight: 9.6g

SpeedyBee BLS 50A 4-in-1 ESC
Firmware: BLHeli_S JH50
Wireless configuration: Full configuration supported by SpeedyBee App
PC configurator download link: https://esc-configurator.com/
Continuous Current: 50A*4
Break current: 55A (5S)
Protective Diode for TV: Yes
External Capacitor: 1500uF Low ESR Capacitor
Protocol ESC: DSHOT300/600
Power Input: 3-6S LiPo
Output power: VBAT
Current sensor: Support
Mount: 30.5x30.5mm (4mm hole diameter)
Dimensions: 45.6(L)*44(W)*6.1mm(H)
Weight: 13.8g

Package Included:
SpeedyBee F405 V3 50A Stack x 1