4.9/ 5.0
100% pembeli merasa puas
16 rating • 5 ulasan
5(15)93.75%
4(1)6.25%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
SpeedyBee F405 WING MINI APP Fixed Wing Flight Controller
Rp599.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: SpeedyBee
Product Name: SpeedyBee F405 WING MINI FC board
MCU: STM32F405,168MHz
Gyro: ICM-42688-P
Barometer: SPL006-001
OSD Chip: AT7456E
Blackbox: MicroSD Card Slot
UART: 6 sets (USART1 USART2 SART3 UART4 UART5 UART6 - Dedicated for Wireless Telemetry connection)
ELRS/CRSF Receiver: Supported, connected to UART1
SBUS: Built-in inverter for SBUS input (UART2-RX)
Dual Analog Camera Switching: Default to Camera1 Video Input (C1) Switch between C1 and C2 using ArduPilot Relay or INAV Modes/USER. Both cameras should have the same video format, either PAL or NTSC.
Supported FC Firmware: INAV: SpeedyBeeF405WING (default) ArduPilot: SpeedyBeeF405WING
Weight: 5.6g
Product Name: SpeedyBee F405 WING MINI PDB board
Input voltage range: 7~26V(2~6S LiPo)
Battery Current Sensor: 80A continuous, 150A peak Connect to FC board Current (Scale 195 in INAV, 50A in ArduPilot)
TVS Protective: Yes
FC BEC output: Output 5.2V +/- 0.1V DC Continuous current 2 Amps, 3A Peak Designed for FCReceiver, GPS module, AirSpeed Sensor, Telemetry modul
Weight: 5.5g
Product Name: SpeedyBee F405 WING MINI Wireless USB Extender
Wireless Configuration (long press BOOT button for 6 seconds to switch modes)
BLE mode, connect to Speedybee APP
Wi-Fi(AP)mode, able to connect to Speedybee APP,QGroundControl APPMissionPlanneretc.WiFi: Speedvbee eFLY-WIFPassword: 88888888
Wi-Fi(STA)mode, able to connect to QGroundControl APP, MissionPlanner, etcStep 1: turn on Personal HotspotStep 2: Set hotspot, locate NAME/Device Name/Hotspot name/etcStep 3: change the current name to eFLY and the password is, 88888888
Wireless off mode
Weight: 3.2g
MCU: STM32F405,168MHz
Gyro: ICM-42688-P
Barometer: SPL006-001
OSD Chip: AT7456E
Blackbox: MicroSD Card Slot
UART: 6 sets (USART1 USART2 SART3 UART4 UART5 UART6 - Dedicated for Wireless Telemetry connection)
ELRS/CRSF Receiver: Supported, connected to UART1
SBUS: Built-in inverter for SBUS input (UART2-RX)
Dual Analog Camera Switching: Default to Camera1 Video Input (C1) Switch between C1 and C2 using ArduPilot Relay or INAV Modes/USER. Both cameras should have the same video format, either PAL or NTSC.
Supported FC Firmware: INAV: SpeedyBeeF405WING (default) ArduPilot: SpeedyBeeF405WING
Weight: 5.6g
Product Name: SpeedyBee F405 WING MINI PDB board
Input voltage range: 7~26V(2~6S LiPo)
Battery Current Sensor: 80A continuous, 150A peak Connect to FC board Current (Scale 195 in INAV, 50A in ArduPilot)
TVS Protective: Yes
FC BEC output: Output 5.2V +/- 0.1V DC Continuous current 2 Amps, 3A Peak Designed for FCReceiver, GPS module, AirSpeed Sensor, Telemetry modul
Weight: 5.5g
Product Name: SpeedyBee F405 WING MINI Wireless USB Extender
Wireless Configuration (long press BOOT button for 6 seconds to switch modes)
BLE mode, connect to Speedybee APP
Wi-Fi(AP)mode, able to connect to Speedybee APP,QGroundControl APPMissionPlanneretc.WiFi: Speedvbee eFLY-WIFPassword: 88888888
Wi-Fi(STA)mode, able to connect to QGroundControl APP, MissionPlanner, etcStep 1: turn on Personal HotspotStep 2: Set hotspot, locate NAME/Device Name/Hotspot name/etcStep 3: change the current name to eFLY and the password is, 88888888
Wireless off mode
Weight: 3.2g
Ada masalah dengan produk ini?