Voltage to PWM Converter Module 0-5V 0-10V to 0-100% Analog to Digital

Features Using embedded technology of single chip microcomputer. Easy to operate, it can be fine-tuned by a potentiometer. Select a different input voltage range by short circuit. The module is small and easy to carry and use. Technical Parameters: Module operating voltage: DC 7V-12V. Conversion range: 0-5V/0-10V voltage conversion to 0%-100% PWM Allowable error: 1% - 3%. VCC: Working power supply 5V-12V. GND: Working power ground. VIN: Input voltage 0-10V. GND: Input voltage ground. GND: Output PWM ground. PWM: Output PWM. Operation instructions: Connect the working voltage to VCC and GND, and do not reverse the connection to avoid damage to the board and device. The controllable voltage is connected to the VIN terminal, and the voltage range is divided into 0-5V and 0-10V according to the selected mode. The PWM output is at the PWM side. The duty cycle can be adjusted by adjusting the voltage. Accuracy can be controlled by adjusting the potentiometer.