4.5/ 5.0
100% pembeli merasa puas
8 rating • 6 ulasan
5(4)50%
4(4)50%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 34
Subtotal
Rp223.000
RO Membrane Air Kita 50 GPD
Rp223.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Utilities Air
RO Membrane Air Kita 50 GPD
It is widely applicable to household water purification, direct drinking in
building or office and other small water purification equipment etc..
SPECIFICATIONS & PARAMETERS
Model Active Membrane Area ft2(m2) Permeate Flow GPD(T/D) Stable Rejection Rate
(%) Min. Rejection Rate (%)
RO-1812-50 40.37 500.19 98 97
STANDARD TEST CONDITION
Concentration of Solution (NaCl) Temperature pH Value Operating Pressure
psi(MPa) Recovery Rate %
250ppm 25 7.5-8 600.41 400/600-1000.69 15
Notes: The permeate flow of single membrane element may vary with in 15%.
Operating Limits and Conditions of Membrane Element:
Max.Working Pressure 300 psi(2.07MPa)
Max. FeedWater Temperature 45
Max. Feed Water SDI15 5.0
Free Chlorine Concentration of FeedWater 0.1mg/L
pH Range of Feed Water During Continuous Operation 3-10
pH Range of Feed Water During Chemical Cleaning 2-12
Max. Pressure Drop of Single Membrane Element 10psi(0.07Mpa)
It is widely applicable to household water purification, direct drinking in
building or office and other small water purification equipment etc..
SPECIFICATIONS & PARAMETERS
Model Active Membrane Area ft2(m2) Permeate Flow GPD(T/D) Stable Rejection Rate
(%) Min. Rejection Rate (%)
RO-1812-50 40.37 500.19 98 97
STANDARD TEST CONDITION
Concentration of Solution (NaCl) Temperature pH Value Operating Pressure
psi(MPa) Recovery Rate %
250ppm 25 7.5-8 600.41 400/600-1000.69 15
Notes: The permeate flow of single membrane element may vary with in 15%.
Operating Limits and Conditions of Membrane Element:
Max.Working Pressure 300 psi(2.07MPa)
Max. FeedWater Temperature 45
Max. Feed Water SDI15 5.0
Free Chlorine Concentration of FeedWater 0.1mg/L
pH Range of Feed Water During Continuous Operation 3-10
pH Range of Feed Water During Chemical Cleaning 2-12
Max. Pressure Drop of Single Membrane Element 10psi(0.07Mpa)
Ada masalah dengan produk ini?