Digital Time Delay Switch Ac 110V 220V Module Timer Relay Modul 10A

*** READY STOCK, SILAHKAN DI ORDER ***
*** Digital Delay Timer Module AC 110V 220V ***

Model: T3230
Timing range: 0-999s,0-999m,0-999h
Power supply voltage: AC 110V-220V
Relay contact output: Max. 10A
LED Display: Red + Blue Dual Display
Size: 79 x 26 x 43mm
Hole size: 72 x 40mm

Instructions:
1.After setting the data, you must wait 6 seconds,6s post modules automatically save memory set data.
2.Press SET key once to enter the time setting mode,the red LED flashes, press the key to increase or decrease the setting time T1.
3.After setting time T1,short press the SET key again, the green LED flashes,and the time is set by pressing the key Time T2, T2 time setting is completed,press SET key again, the system will automatically save the memory setting time or wait for 6s, 6s module will automatically save the data memory.
4.Long press SET,enter parameter setting are two sets of parameters for the user to select P0, P1.Short press SET in the current mode to switch between P0 and P1.
5.In P0 parameter can be set by pressing the key to adjust their own timing the P1 parameter can be set by adding and subtracting keys work mode.
P0--0: T1 Timing mode is second.
P0-1: T1 timing mode is minutes.
P0--2: T1 Timing Time mode is hour.
P1--0: Delay T1 time, relay pull (T1 timer)
P1--1: Relay release after T1 time delay (T1 timer)
P1--2: Delay T1 time, relay pull (T1 timer), and then relay release after T2 time delay (T2 timing), then it is finished.
P1--3: Relay release after T1 time delay (T1 timer),then delay T2 time,relay pull (T2 timing),then it is finished.
P1--4: Delay T1 time, relay pull (T1 timer),and then relay release after T2 time delay (T2 timer), cycling.
P1--5: Relay release after T1 time delay (T1 timer), then delay T2 time,relay pull(T2 timer), cycling.

Isi Paket:
1 x T3220 LED Digital Display Time Delay Relay Adjustable Power Switch Relay Module Cycle Timer Controller 110-220V