XKC-C352-2P Liquid Water Level Sensor Module Non-contact Sensor

is_customized : Yes Model Number : XKC-C352-2P Liquid Water Level Sensor Non-contact Sensor Module Brand Name : diymore Origin : Mainland China XKC-C352-2P Liquid Water Level Sensor Module Non-contact Sensor Automatic Control Intelligent Controller Water Level Controller The high and low level controller can be used in conjunction with the non-contact liquid level sensor, and can also be used with other liquid level sensors, such as float ball. When the liquid level is too low, the liquid level sensor sends out the low level alarm signal, and the pump starts automatically and adds liquid level. On the contrary, the pump stops automatically when the liquid level is too high. In this way, the function of automatic control of liquid level of container is realized. Feature: 1 gt;. Strong compatibility, can be used in conjunction with a variety of liquid level sensor 2 gt;. Strong protection, with waterproof pump idling protection and water level overflow detection output, with 4 hours overtime pumping alarm 3 gt;. Relay dry node output, can be applied to a variety of load control 4 gt;. Control of diversification, manual or automatic mode control of water pump 5 gt;. The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed Function: 1 gt;. Water level automatic control: water level is lower than the low position induction probe, automatically start the pump, the water level rises to high level, and automatically closes the pump 2 gt;. Idling delay pump: after starting, if the water supply pipe is detected without water, then delay 3-5 minutes to close the pump. During the pumping process, if the water f