Beckhoff EL9410 Power supply terminal for E-bus

E L9410 | Power supply terminal for E-bus, with diagnostics The EL9410 power supply terminal is used to refresh the E-bus. Data is exchanged between the coupler and the EtherCAT Terminal over the E-bus. Each terminal draws a certain amount of current from the E-bus (see “current consumption E-bus” in the technical data). This current is fed into the E-bus by the relevant coupler’s power supply unit. In configurations with a large number of terminals it is possible to use the EL9410 in order to supply an extra 2 A to the E-bus. The EL9410 has a diagnostic function which is displayed by LED and on the process image. Technical data EL9410 Technology power supply terminal Short-circuit proof yes Input voltage 24 V DC (-15 %/+20 %) Input current typ. 70 mA + (E-bus/4) Output voltage 5 V for E-bus supply Output current 2 A Current consumption E-bus – Electrical isolation 500 V (E-bus/field potential) Insulation voltage input/output – Power contacts max. 24 V DC/max. 10 A Diagnostics in the process image yes Special features standard EL supply Weight approx. 65 g Operating/storage temperature 0…+55 °C/-25…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. class/installation pos. IP 20/variable Pluggable wiring for all ESxxxx terminals Approvals CE, UL, Ex