Beckhoff EK1101 0050 EtherCAT Coupler with ID switch Original Germany

EK1101 | EtherCAT Coupler with ID switch The EK1101 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1101 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. The EK1101 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable. Technical data EK1101 Task within EtherCAT system coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks, with identity verification Data transfer medium Ethernet/EtherCAT cable (min. Cat. 5), shielded Distance between stations max. 100 m (100BASE-TX) Number of EtherCAT Terminals up to 65,534 Type/number of peripheral signals max. 4.2 GB addressable I/O points Number of configurable IDs 4096 Protocol EtherCAT Delay approx. 1 µs Data transfer rates 100 Mbit/s Configuration not required Bus interface 2 x RJ45 Power supply 24 V DC (-15 %/+20 %) Current consumption from US 70 mA + (∑ E-bus current/4) Current consumption from UP load Current supply E-bus 2000 mA Current consumption E-bus – Power contacts max. 24 V DC/max. 10 A Electrical isolation 500 V (power contact/supply voltage/Ethernet) Weight approx. 105 g Operating/storage temperature -25…+60 °C/-40…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. class/installation pos. IP 20/variable Approvals/markings CE, UL, ATEX, IECEx Ex-Marking II 3 G Ex nA IIC T4 Gc Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc