Distribution Blocks / Divider Block

DISTRIBUTION BLOCK / DIVIDER BLOCK ARIEL Specification: Brand : ARIEL Distribution Blocks Distribution blocks consist of three to seven divider valves and an optional bypass block fastened to a segmented baseplate. O-rings seal between the divider valves and baseplate and between baseplate segments. Check valves are installed at all lube port outlets. Divider valves contain metering pistons that discharge a predetermined amount of oil with each cycle in a single line, progressive lubrication system. The baseplate contains the divider valve inlet and outlet connections, interrelated passageways, and built-in check valves. All lubricant piping to and from the distribution block connects to the baseplate. The baseplate consists of one inlet block, three to seven intermediate blocks, one end block, and three tie rods. The number of baseplate intermediate blocks determines the number of divider valves allowed. Each distribution block requires a minimum of three divider valves. Some systems include primary and secondary distribution blocks. Primary distribution blocks feed two or more secondary distribution blocks. Connect a no-flow device to the primary distribution block.