4.9/ 5.0
96% pembeli merasa puas
64 rating • 10 ulasan
5(59)92.19%
4(3)4.69%
3(1)1.56%
2(0)0%
1(1)1.56%
Atur jumlah dan catatan
Stok Total: 178
Subtotal
Rp65.900
Switch Sensor Level Air Stainless / Water Level Switch Float Arduino
Rp65.900
NOTE :
-SETIAP PEMBELIAN DIATAS 200 RIBU, GRATIS 1 BUAH CD BERISI BANYAK PROJECT UNTUK PRAKTIKUM LENGKAP DENGAN SOURCODE DAN SKEMATIK NYA.
-DAN MASIH BANYAK LAGI MODUL PRAKTIKUM LAINNYA.
-MODUL PRAKTIKUM AKAN DIKIRIM VIA EMAIL, JIKA MEMESAN SERTAKAN EMAIL.
sangat cocok untuk yang ingin belajar.
Deskripsi Produk
A float switch is a device used to sense the level of liquid within a tank.
The switch may actuate a pump, an indicator, an alarm, or other device.
It can be easily converted from normally open to normally close by inverting the float.
Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.
Product Name : Water Level Sensor;
Contacts : NO+NC;
Max Contact Rating : 10W
Max Switching Voltage : 100V DC;
Max Switching Current : 0.5A;
Max Breakdown Voltage : 220V DC;
Max Carry Current : 1.0A
Max Contact Resistance : 100m？？;
Temperature Rating : -30 - +125 ？°C;
Float Ball Size(Approx) : 25 x 27mm / 1" x 1.1"(L*D);
Thread Dia(Approx) : 9.8mm / 0.386"
Hex Nut Size(Approx) : 19mm / 0.75";
Bottom Clip Dia(Approx) : 15mm / 0.6";
Body Total Length(Approx) : 81mm / 3.2";
Body Total Width(Approx) : 70mm / 2.8"
Cable Length : 31cm / 12.2";
Color : Silver Tone;
Net Weight : 47g;
Package Content : 1 x Water Level Sensor
-SETIAP PEMBELIAN DIATAS 200 RIBU, GRATIS 1 BUAH CD BERISI BANYAK PROJECT UNTUK PRAKTIKUM LENGKAP DENGAN SOURCODE DAN SKEMATIK NYA.
-DAN MASIH BANYAK LAGI MODUL PRAKTIKUM LAINNYA.
-MODUL PRAKTIKUM AKAN DIKIRIM VIA EMAIL, JIKA MEMESAN SERTAKAN EMAIL.
sangat cocok untuk yang ingin belajar.
Deskripsi Produk
A float switch is a device used to sense the level of liquid within a tank.
The switch may actuate a pump, an indicator, an alarm, or other device.
It can be easily converted from normally open to normally close by inverting the float.
Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.
Product Name : Water Level Sensor;
Contacts : NO+NC;
Max Contact Rating : 10W
Max Switching Voltage : 100V DC;
Max Switching Current : 0.5A;
Max Breakdown Voltage : 220V DC;
Max Carry Current : 1.0A
Max Contact Resistance : 100m？？;
Temperature Rating : -30 - +125 ？°C;
Float Ball Size(Approx) : 25 x 27mm / 1" x 1.1"(L*D);
Thread Dia(Approx) : 9.8mm / 0.386"
Hex Nut Size(Approx) : 19mm / 0.75";
Bottom Clip Dia(Approx) : 15mm / 0.6";
Body Total Length(Approx) : 81mm / 3.2";
Body Total Width(Approx) : 70mm / 2.8"
Cable Length : 31cm / 12.2";
Color : Silver Tone;
Net Weight : 47g;
Package Content : 1 x Water Level Sensor
Ada masalah dengan produk ini?