4.9/ 5.0
100% pembeli merasa puas
109 rating • 23 ulasan
5(102)93.58%
4(7)6.42%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 5
Subtotal
Rp6.000
SENSOR KETINGGIAN PERMUKAAN AIR WATER LEVEL SENSOR MODULE ( ARDUINO )
Rp6.000
Product Description
This is simple and small portable water level/water droplet identification, detection sensor water that have high cost performance. Complete water yield and analog conversion, the output value apply to your custom function. It is low power consumption and high sensitivity. It can make better performance with Arduino 328 controller and sensor relay shield.
Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read Arduino development board to achieve the level alarm effect.
Specifications
Working Voltage: DC 3-5V
Working Current: <20mA
Sensor Type: Simulation
Detection Area: 40 mm x 16 mm
Manufacturing Process: FR4 double spray tin
Fixed Hole Size: 3.2 mm
Humanized Design: Half moon sag nonskid treatment
Working Temperature: 10 °C to 30 °C
Work Humidity: 10% to 90% without condensation
Size: 65 mm x 20 mm x 8 mm
Optional Accessories: 3 pin sensor connecting line,Arduino 328 controller,Sensor relay shield
This is simple and small portable water level/water droplet identification, detection sensor water that have high cost performance. Complete water yield and analog conversion, the output value apply to your custom function. It is low power consumption and high sensitivity. It can make better performance with Arduino 328 controller and sensor relay shield.
Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume in order to determine the water level. Easy to complete water to analog signal conversion and output analog values can be directly read Arduino development board to achieve the level alarm effect.
Specifications
Working Voltage: DC 3-5V
Working Current: <20mA
Sensor Type: Simulation
Detection Area: 40 mm x 16 mm
Manufacturing Process: FR4 double spray tin
Fixed Hole Size: 3.2 mm
Humanized Design: Half moon sag nonskid treatment
Working Temperature: 10 °C to 30 °C
Work Humidity: 10% to 90% without condensation
Size: 65 mm x 20 mm x 8 mm
Optional Accessories: 3 pin sensor connecting line,Arduino 328 controller,Sensor relay shield
Ada masalah dengan produk ini?