Arctic ALPINE 17 I LP I CO - Low Profile Compact Air CPU Cooler for Intel Socket 1700 I 1851 - ALPINE 17

Arctic ALPINE 17 I LP I CO - Low Profile Compact Air CPU Cooler for Intel Socket 1700 I 1851

*Konfirmasi stok sebelum pemesanan

Product Name : Arctic ALPINE 17 Series

Tersedia 3 Varians :
ALPINE 17
ALPINE 17 LP
ALPINE 17 CO

Designed for Intel Alder Lake
The Alpine 17 is exclusively compatible with Socket LGA1700 and LGA1851 with Intel's Alder Lake CPUs.

Low Profile Design
With an installation height, measured from the CPU to the top of the cooler, of only 42.9 mm, the Alpine 17 is particularly suitable for small and narrow housings. It is space-saving, easy to assemble and allows full access to all components close to the CPU. The compact Top-Blower CPU cooler also cools areas around the CPU socket and is predestined for HTPC and Mini-ITX cases.

Good Price-Performance Ratio
Thanks to its flat radial heat sink and sophisticated fan design, the Alpine 17 offers performance at a very low price.

Proven Technology
ARCTIC uses a proven heat sink design in the Alpine 17. The extra fine Y-shaped, fanned-out cooling fins ensure a considerable increase in the cooling surface and optimisation of airflow. A novel production process makes it possible to extrude the fins even more finely without making them unstable. This enables the production of a powerful, but at the same time, very flat and compact radial heat sink.

Wide rpm Range
The Alpine 17 features an updated motor with a very wide PWM-controlled rpm range from 300 up to 3000 rpm. At a low system load, the fan switches off almost completely. This keeps the noise level at a minimum while guaranteeing maximum cooling performance under stress.

High-Quality Bearing
Thanks to an alloy combination developed in Germany, friction inside the bearing is reduced and higher efficiency is achieved. As a result, there is less heat development, less bearing noise, and the service life of the fan is extended.

Easy And Tool-Free Installation
Installation is very easy thanks to the push pins and the cooler’s lightweight. The cooler can be easily mounted on the built-in motherboard without any tools. Thanks to the proven snap-in mechanism of the push pins, the cooler can be reliably installed at all times, even in the case of vibrations.

General Specifications

Compatibility
Intel Socket: 1851, 1700
RAM Clearance: unlimited

Heatsink
Heatsink: Radial
Material: Aluminum
Thermal paste: MX-4 pre-applied

ALFINE 17 LP
Fan Diameter: 92 mm
Speed: 300—3000 rpm
Bearing: Fluid Dynamic Bearing
Noise Level: 0.5 Sone
Current | Voltage: 0.18 A
Connector: 4-Pin PWM-Fan-Connector
Speed Control: Pulse Width Modulation — PWM

Dimensions & Weight
Installation Height: 42.9 mm
Length: 95 mm
Width: 95 mm
Height: 53.5 mm
Weight: 183.5 g
Thermal Paste: MX-4 pre-applied

ALFINE 17 CO
Fan Size: 92 mm
Fan Speed: 250—2700 rpm
Fan Bearing: Dual Ball Bearing
Noise Level: 0.5 Sone
Current: 0.09 A
Connector: 4-Pin

Size & Weight
Length: 95 mm
Width: 95 mm
Height: 77 mm
Installation height: 66.25 mm
Weight: 288 g
Thermal Paste: MX-4 pre-applied

ARCTIC ALPINE 17
Fan Diameter: 92 mm
Speed: 100—2000 rpm
Bearing: Fluid Dynamic Bearing
Noise Level: 0.3 Sone
Current | Voltage: 0.12 A
4-Pin PWM-Fan-Connector
Speed Control: Pulse Width Modulation — PWM

Dimensions & Weight
Length: 95 mm
Width: 95 mm
Installation height: 66.25 mm
Height: 77 mm
Weight: 288 g
Thermal paste: MX-4 (0.8 g)