Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp7.649.000
SHL-150 Portable Hardness Tester Brinell Vivtorinox Hardness SH150
Rp7.649.000
- Kondisi: Baru
- Waktu Preorder: 28 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Tool
Portable Hardness Tester Brinell Vivtorinox Hardness Tester SHL-150
SHL-150 portable hardness tester, can directly measure Rockwell (HRC, HRB), Richter (HL), Brinell (HB), Vickers (HV), Shore (HS) hardness values. In line with international standards and the Ministry of Machinery Industry promulgated the "Leeb hardness tester technical conditions ZBN71010-1990", the State Quality and Technical Supervision issued the "metal Leeb hardness test method GB / T 17394-1998", Leeb hardness standards JB / T9378-2001 and other standards.
SHL-150 A host can be equipped with 7 different impact devices, automatic identification of the impact device type, replacement without re-calibration. Ultra-low power design, the use of high-performance lithium battery for long work and standby time, more compact and flexible design to improve the use of flexibility.
According to Leeb hardness measurement principle, a variety of metal materials can be high-precision detection. Support "steel" material, when using the D / DC-type impact device test "forged steel" sample, you can directly read the HB value, without manual look-up table. Easy to switch to all the hardness system (HL, HB, HRB, HRC, HRA, HV, HS), parallel conversion of the hardness of the measured value.
Measuring range: HLD (170 ~ 960) HLD
Measuring direction: 360 °
Hardness system: Richter, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shaw
Display: LCD, 128 × 64 graphics dot matrix LCD
Data storage: 48 ~ 350 groups (the number of shocks 32 to 1)
Upper / lower limit setting range: same as measuring range.
Charging power: 5VDC, 220VAC
Charging time: 2 to 3.5 hours
Battery: 3.7V, (1400mAh) lithium battery
Ambient temperature: 0 ~ 40 ℃
Storage temperature: -25 ~ 70 ℃
Continuous working time: about 100 hours (not open backlight)
Communication Interface Standard: USB
SHL-150 portable hardness tester, can directly measure Rockwell (HRC, HRB), Richter (HL), Brinell (HB), Vickers (HV), Shore (HS) hardness values. In line with international standards and the Ministry of Machinery Industry promulgated the "Leeb hardness tester technical conditions ZBN71010-1990", the State Quality and Technical Supervision issued the "metal Leeb hardness test method GB / T 17394-1998", Leeb hardness standards JB / T9378-2001 and other standards.
SHL-150 A host can be equipped with 7 different impact devices, automatic identification of the impact device type, replacement without re-calibration. Ultra-low power design, the use of high-performance lithium battery for long work and standby time, more compact and flexible design to improve the use of flexibility.
According to Leeb hardness measurement principle, a variety of metal materials can be high-precision detection. Support "steel" material, when using the D / DC-type impact device test "forged steel" sample, you can directly read the HB value, without manual look-up table. Easy to switch to all the hardness system (HL, HB, HRB, HRC, HRA, HV, HS), parallel conversion of the hardness of the measured value.
Measuring range: HLD (170 ~ 960) HLD
Measuring direction: 360 °
Hardness system: Richter, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shaw
Display: LCD, 128 × 64 graphics dot matrix LCD
Data storage: 48 ~ 350 groups (the number of shocks 32 to 1)
Upper / lower limit setting range: same as measuring range.
Charging power: 5VDC, 220VAC
Charging time: 2 to 3.5 hours
Battery: 3.7V, (1400mAh) lithium battery
Ambient temperature: 0 ~ 40 ℃
Storage temperature: -25 ~ 70 ℃
Continuous working time: about 100 hours (not open backlight)
Communication Interface Standard: USB
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan